초록
강구조물의 제작에는 흑피 등의 이물질 제거 및 도장의 부착성 증대를 위해 블라스트 표면처리가 실시되고 있지만, 이러한 도장용 블라스트 처리가 용접이음의 피로거동에 미치는 영향에 대해서는 검토되어 있지 않은 실정이다. 이에 본 논문에서는 강교 도장용 블라스트 처리가 용접이음부의 피로거동에 미치는 영향을 검토하기 위하여, 용접한 그대로 및 용접 후 블라스트 처리한 면외거셋 용접이음을 대상으로 피로실험을 실시하였다. 그 결과, 강교 도장용 블라스트 처리에 의해 면외거셋 용접이음의 용접지단부 비드접선각도 및 곡률반경이 증가되고 압축잔류 응력이 도입됨을 확인하였다. 그리고 면외거셋 용접이음의 피로수명은 고응력범위에서는 블라스트 처리의 유무와 상관없이 거의 동일하였지만, 저응력범위(150MPa이하)에서는 피로수명이 증가하였으며, 피로한계는 약 160%정도로 크게 증가함을 확인하였다.
Blasting has been applied in newly-built steel structures for cleaning forged surfaces and increasing the adhesive property of applied painting systems. However, the effect of the blast cleaning on fatigue behavior of welded joints is not clear. In this paper, fatigue tests were carried out on out-of-plane gusset welded joints and the effect of the blast cleaning on the fatigue behavior was studied. The curvature radius at the weld toe of the surface-treated specimens by using the blast method is larger than that of as-welded specimens. By the blast cleaning compressive residual stresses were induced into weld toes. The experimental results showed that the fatigue life of surface-treated specimens is longer than that of as-welded specimens, even though the fatigue life of surface-treated specimens and that of as-welded specimens are not clearly different in the high stress range. About a 160% increase in fatigue limit could be realized by using blast cleaning.