초록
최근 급증하는 전력수요 충족을 위해 송전선로 및 송전철탑의 대형화가 진행되고 있다. 국내 송전철탑 설계기준에서는 선로방향하중에 대해 상시와 이상시로 구분하여 검토하고 있다. 송전철탑 붕괴의 가장 큰 원인이 되고 있는 선로 단선으로 인한 이상시 철탑 주재의 안전성 검토가 필요하다. 국내 설계기준은 축력이 지배적인 트러스요소를 철탑에 적용하고 있으며, 단선으로 인한 불평형 하중을 암끝단에 재하하도록 하고 있다. 불평형 하중을 유발하는 단선은 두 곳에서 동시에 발생하는 경우까지 고려하고 있으며, 그 이상 여러 상의 전선이 동시에 단선되는 것은 고려하고 있지 않다. 이에 본 연구는 발생 가능한 모든 단선의 경우에 대해서 보요소를 적용한 유한요소해석을 실시하여 극한상태를 파악하고 국내 설계기준에 따른 안전성를 평가하였다. 유한요소해석 결과분석을 통해 철탑 주주재에는 이상시 휨응력의 영향력이 매우 크게 나타났으며, 비대칭 일측의 모든 전선이 단선된 경우 기존 철탑의 설계방법이 안전하지 않음을 알 수 있었다. 따라서 이상시 철탑의 경제성과 정확한 안전성 확보를 위해 부재의 극한상태와 이상시 발생빈도를 고려하는 설계법의 적용이 필요할 것으로 판단된다.
A transmission tower was designed according to general and special load cases based on KEPCO Design Specifications. The special load case such as unbalanced load a cording to some broken wires has not been considered significantly. Therefore, this paper presents investigations on the stability and safety of main post members subjected to unbalanced load and design wind load. In this study, all cases totally considered. From the finite element analyses using LUSAS program, the stresses on the tower subjected to unbalanced load and design wind load were very high in comparison to the allowable stresses of the steel post member that was used. Some of the post member had higher stresses than the yield stress of the steel member. This paper also shows an example to improve the capacity of the post members using increased cross-section members. Based on the analyses results, when investigating the safety of the transmission tower, one must consider thenew design philosophy including ultimate strength of the member and reliability of the special loading cases.