Abstract
study proposes a new key-segment closing method using thermal effect as a substitute to the process of set-back and reset-back for the FCM construction of a partially earth-anchored cable-stayed bridge. The proposed method is to artificially heat up the inside of girders located in the main span before closing the key-segment in a cantilever state. Then, the heat is removed after finishing the closure in a continuous bridge state. Using the changes in boundary conditions and structural systems, the proposed method can generate new member forces that reflect the advantage of the partially earth-anchored cable system. From the construction sequence analysis, it is found that the proposed method increases the efficiency of a partially earth-anchored cable-stayed bridge by reducing the compressive axial forces on the girders.
본 연구에서는 FCM 공법으로 건설되는 사장교의 최종 시공 단계인 키-세그먼트 폐합 방법으로 기존의 set-back과 reset-back 방법 대신 온도 효과를 이용한 폐합방법을 제안하여, 이를 일부 타정식 사장교에 적용하였다. 제안된 방법은 키-세그먼트 폐합 전 캔틸레버 상태인 교량 시스템의 중앙 경간부 거더 내부에 인위적인 가열 작업을 하여 거더를 신장시킨 후 키-세그먼트 폐합 후 연속교 상태에서 가열을 제거하는 방법으로, 가열 작업과 가열 제거 작업시의 시스템 변화를 이용하여 교량 시스템에 인위적인 부재력을 발생시키는 방법이다. 기존의 자정식 사장교를 일부 타정식 사장교로 변경 후 시공단계 해석을 수행한 결과, 인위적으로 발생된 부재력은 일부 타정식 사장교의 구조 시스템 특징에 부합하여 거더부의 압축력을 감소시키므로 제안된 방법은 일부 타정식 사장교에 효과적으로 적용될 수 있는 것으로 판단된다.