탄성마찰포트받침을 적용한 교량의 내진성능에 관한연구

A Study on Aseismatic Performance of Base Isolation Systems Using Resilient Friction Pot Bearing

  • 오주 (유니슨기술연구소) ;
  • 현기환 (전남대학교 토목공학과) ;
  • 박연수 (전남대학교 토목공학과) ;
  • 박성규 (대구대학교 토목공학과)
  • 투고 : 2007.01.15
  • 발행 : 2008.01.30

초록

내진설계기준이 점차 강화되고 다경간 연속화에 대한 시도가 증가됨에 따라 기존의 내진설계로는 지진력의 처리가 곤란하여 다점고정장치와 감쇠를 통해 지진에너지를 소산시키는 장주기화, 분산, 감쇠를 통해 지진력을 효과적으로 감소시키는 면진장치의 사용이 날로 증가하고 있다. 그러나 내진장치 적용에 대한 다양성 부재와 장치를 적용한 설계경험의 부족 등의 이유로 특정교량에 적절한 내진장치를 선정하는데 상당한 어려움이 따르고 있다. 따라서 본 연구에서는 다양한 내진장치가 적용된 교량의 지진시 거동특성에 대한 연구를 수행하여 받침장치 선정시 활용할 수 있도록 하였다.

For more districted seismic design and attemped multi-bridge continuity, the existing seismic design is difficulted to treat seismic activity. So, many company applied multi-fixed point and damper or isolator, which is effective for decreasing seismic energy, on period shift, decentralization and damping. But, there is hard to design special bridge with adjusted seismic system because of absence seismic device and insufficient design experience. Therefore, the study on behavior characteristics of designed bridge with various seismic device is performed to utilize the result of this for selection of adequate seismic device.

키워드

참고문헌

  1. 박규식, 오주원, 이인원, "여러 가지 기초분리 장치의 내진성능연구", 대한토목학회 학술대회논문집, 1999. 10, pp. 581-584
  2. 구봉근, 이재범, 이현석, 이철희, "강합성 교량의 내진 및 면진설계에 대한 연구", 한국강구조학회학술발표논문집, 2003. 9, pp. 18-23
  3. 김효범, 김영석, 정길영, 음성우, "내진분리를 위한 마찰고무 베어링의 동특성실험", 대한토목학회논문집, 제20권 제1-A호, 1996. 1, pp. 425-433
  4. 박진완, 김영석, 권형오, 김두훈, "탄성마찰포트받침 및 탄성받침 이용하여 지진격리된 PSC Beam교의 시간이력해석", 대한토목학회 학술발표회, 2001. 10, pp. 98-101
  5. 오주, 박건록, 송현섭, 이종윤, "탄성마찰포트받침을 이용한 기초분리장치의 내진성능 비교 연구", 대한토목학회 학술대회논문집, 2006. 10, pp. 89-92
  6. 건설교통부, "도로교설계기준", 2005
  7. AASHTO, Guide Specifications for Seismic Isolation Design, Washinton D. C, 2001