The Effect of Steel Fiber on the Compressive Strength of the High Strength Steel Fiber Reinforced Cementitious Composites

강섬유의 혼입이 고강도 강섬유 보강 시멘트 복합체의 압축강도에 미치는 영향

  • Received : 2007.07.10
  • Published : 2008.05.30

Abstract

Many researchers have reported that adding steel fiber to concrete improved its tensile and flexural strength significantly, but relatively few studies have been made on the compressive behavior of steel fiber-reinforced concrete. It is still less in case of high strength steel fiber-reinforced cementitious composites(SFRC). The main objective of this research is to examine the effect of adding steel fiber on the compressive strength of high strength SFRC using fiber reinforcing index(RI, $V_f(I_f/d_f)$). It was found from the study that compressive strength was noticeably increased in proportion to RI. In conclusion, the relationship between Reinforcing Index(RI) and compressive strength in case of high strength steel fiber-reinforced cementitious composites was suggested.

본 연구에서는 마이크로 입자들로 구성된 매트릭스의 강섬유 보강 시멘트 복합체에서 강섬유가 압축강도에 미치는 영향을 규명하고자 하였으며, 강섬유의 섬유혼입률과 섬유형상비에 따른 영향을 파악하고 혼입률과 형상비를 동시에 고려한 변수인 섬유보강지수(RI)에 따른 압축강도의 변화를 살펴보았다. 실험결과에 따르면 마이크로 입자로 구성된 매트릭스의 강섬유보강 복합체에서는 섬유보강지수가 증가에 따라 압축강도가 선형적으로 증가하였다. 이와 같은 결과로부터 섬유보강지수와 압축강도와의 관계를 나타내는 모델식을 제안하였다.

Keywords

References

  1. 부척량 등, '강섬유보강 콘크리트의 압축응력-변형률 특성에 관한 실험적 연구', 대한건축학회논문집 6권 6호, 통권32호, 1990. 12, pp. 295-307
  2. 박정준 등, '초고강도 강섬유 보강 시멘트 복합체의 구성인자가 압축강도에 미치는 영향', 한국콘크리트학회논문집, Vol. 6, No. 1, 2005, pp. 35-41
  3. 한국건설기술연구원, '초고성능 시멘트 복합재를 활용한 교량 거더 개발 중간보고서', 건설교통부, 2004
  4. V. Ramakrishnan, G. Y. Wu and G. Hosalli, 'Flexural Behavior and Toughness of Fiber Reinforced Concretes', Transportation Research Record 1996, pp. 69- 77
  5. L. J. M. Nelissen, 'Biaxial Testing of Normal Concrete', Heron(Delft), Vol. 18, No. 1, 1972, pp. 90
  6. H. Kupfer, H. K. Hilsdorf, and H. Rusch, 'Behavior of Concrete under Biaxial Stresses', ACI Journal Proceedings, Vol. 66, No. 8, August, 1969, pp. 656-666
  7. S. P. Shah and B. V. Rangan, 'Fiber Reinforced Concrete Properties', ACI Journal Proceedings, Vol. 68, No. 2, February, 1971, pp. 126-135
  8. W. F. Chen and J. L. Carson, 'Stress-Strain Properties for Random Wire Reinforced Concrete', ACI Journal proceedings, Vol. 68, December, 1971, pp. 933-936
  9. G. R. Williamson, 'Effect of Steel Fibers on the Compressive Strength of Concrete', Fiber Reinforced Concrete, SP-44, American Concrete Institute, Detroit, 1974, pp. 195-207
  10. P. Thiptbroto, 'Tensile Strain Hardening of High Performance Fiber Reinforced Cement Based Composites', Ph.D. Thesis, Department of Civil Engineering, University of Michigan, 1991
  11. A. Naaman, D. Otter and H. Najm, 'Elastic Modulus of SIFCON in Tension and Compression', ACI Materials Journal, Vol. 88, No. 6, 1991, pp. 603-612
  12. P. Richard and M. Cheyrezy, 'Composition of Reactive Powder Concretes', Cement and Concrete Research, Vol. 25, No. 7, pp. 1501-1511, 1995 https://doi.org/10.1016/0008-8846(95)00144-2
  13. Hugo S. Armelin and Nemkumar Banthia, 'Predicting the Flexural Postcracking Performance of Steel Fiber Reinforced Concrete from the Pullout of Single Fibers', ACI Material Journal, V. 94, No. 1, pp. 18-31
  14. P. Rossi, P. Acker and Y. Malier, 'Effect of Steel Fiber at Two Stages: the Material and the Structure', Materials and Structures, Vol. 20, 1987, pp. 436-439 https://doi.org/10.1007/BF02472494
  15. D. A. Fanellla and A. E. Naaman, 'Stress- Strain Properties of Fiber Reinforced Mortar in Compression', ACI Journal, Vol. 82, No. 4, 1985, pp. 475-483
  16. Yoshio Kosaka et al, 'Experimental Study on Inelastic Stress-Strain Behavior of Steel Fiber Reinforced Concrete under Compression', Trans. of A. I. J., No. 337, March, 1984, pp. 15-24
  17. A. S. Ezeldin and P. N. Balaguru, 'Normal- and High-Strength Fiber Reinforced Concrete under Compression', Journal of Materials in Civil Engineering, Vol. 4, No. 4, November, 1992, pp. 415-429 https://doi.org/10.1061/(ASCE)0899-1561(1992)4:4(415)
  18. W. Yin and T. T. C. Hsu, 'Fatigue Behavior of Steel Fiber Reinforced Concrete in Uniaxial and Biaxial Compression', ACI Materials Journal, Vol. 92, No. 1, 1995, pp. 71-81