A Study on the Relation between Dynamic Deflection Modulus and In-Situ CBR Using a Portable FWD

소형FWD를 이용한 노상토의 동적변형계수와 현장 CBR의 상관 연구

  • 강희복 (한영대학 토목환경과) ;
  • 김교준 (전남대학교) ;
  • 박승균 (전남대학교 토목공학과, 남양건설(주)) ;
  • 김종렬 (전남대학교 토목공학과)
  • Received : 2007.08.02
  • Published : 2008.03.30

Abstract

The road construction, as part of effort to ease the worsening traffic, has been underway throughout the nation, while the existing road has been increasingly losing its load carrying capacity due to such factors as heavy traffic and weathering. In the case of site, the soil type, plasticity index, and specific gravity were SC, 12.2%, and 2.66, respectively. The maximum dry density, optimum moisture content and modified CBR were $1.895g/cm^3$ (Modified Compaction D), 13.6%, and 16.2%, respectively. A correlation of coefficient expressed good interrelationship by 0.90 between the CBR estimated from a dynamic penetration index of dynamic cone penetrometer test and a deformation modulus converted from a dynamic deflection modulus obtained from a portable FWD test.

최근 교통소통의 필수적인 수단으로 많은 도로가 건설 중에 있으며 기 시공된 도로 등은 차량의 통행과 기후 등의 여러 요인에 의해 내하력이 저하되고 있다. 본 연구에 적용된 지반의 흙의 종류와 소성지수 그리고 비중은 각각 SC, 12.2%, 2.66이였으며 최대건조단위중량, 최적함수비, 수정CBR은 각각 $1.895g/cm^2$ (수정다짐 D), 13.6%, 16.2%였다. 이러한 지반조건에서 동적콘관입시험의 관입지수로부터 추정한 CBR과 소형 FWD시험의 동적변형계수로부터 환산한 정적변형계수 사이에는 상관계수가 0.90으로 높은 상관성을 나타내었다.

Keywords

References

  1. 김수일, 최준성, 이양구, "아스팔트 콘크리트 포장구조체의 물성추정을 위한 FWD시험결과의 최적역산기법 개발", 대한토목학회논문집, Vol. 18, No. 3-1, 1998, pp. 41-52
  2. 김종렬, 강권수, 박달수, 강승구, "소형 FWD의 개량을 통한 아스팔트 포장체의 물성치 추정에 관한 연구", 대한토목학회학술발표회논문집, 2002, pp, 134-137
  3. 류명찬, "포장동적관입시험기에 의한 보조기층 및 노상 지지력 측정", 한국도로학회논문집, 제5권 제1호, 2003, pp. 35-45
  4. 박용부, 정형식, "동평판 재하시험을 이용한 정적 및 동적 변형계수 비교", 한국지반공학회논문집, 제19권 제5호, 2003, pp. 335-342
  5. 박태순, 최준성, 박재균, "회복탄성계수 측정을 위한 Portable FWD의 활용", 대한토목학회학술발표회논문집, 2001, pp. 1-4
  6. 안지환, 양성린, 박희문, 권수안, "현장에서의 동적관입시험을 이용한 노상토의 지지력 평가연구", 한국도로학회논문집, 제6권 제3호, 2004, pp. 17-26
  7. Harison, J.A., "Correlation of CBR and Dynamic Cone Penetrometer Strength Measurement of Soils", Technical Note No.2, Australian Road Research Board, Vol. 4, 1986
  8. Livneh, M., and Ishai, I., "Pavement and Material Evaluation by a Dynamic Cone Penetrometer", Proc., 6th Intl. Conf, on Strut., Design of Asphalt Pavement. University of Michigan, Ann Arbor, 1987, July, pp. 665-668
  9. Livneh, M., "A Single Measurement with the Portable FWD to Estimate the In-Situ Asphalt layers Moduli" Transportation Research Record, No. 1570, TRB. 118-125, 1987
  10. Livneh, M., Livneh, A.N., Elhadad, E, "Determining a Pavement Modulus from Portable FWD Testing", Geotechnical Testing Journal, GTJODJ (ASTM), Vol. 20, No. 4. 1997, pp. 373-382 https://doi.org/10.1520/GTJ10404J
  11. Moshe, L. and Yair, G. "Use of Falling-Weight Deflectometer and Light Drop Weight for Quality Assessment During Road Formation and Foundation Construction" TRB 80th Annual Meeting, Washington, D. C., 2001