Abstract
The study on the development of rapid analytical method of PCBs containing waste was performed by considering the extraction, column cleanup process, analytical condition and so on. In the established method, new sample clean-up procedure, new quantification peaks and temperature program were introduced. Method detection limit of the method was 0.5 mg/L, and the method could save the total run time to 2/3, therefore save the analysis cost, The new rapid analytical method of transformer oil was suggested to the waste official test method.
본 연구에서는 PCBs 함유 폐기물의 적정관리방안을 마련하기 위하여 우리나라의 폐기물공정시험방법에서 제시하고 있는 액상폐기물 중 PCBs 분석방법을 토대로 시간 및 비용을 효과적으로 보다 신속하게 분석하는 방법을 제시하고자, 추출 및 전처리방법, 칼럼정제방법, 분석용 칼럼 조건, 기기분석 조건 및 정량방법을 개발하였다. 분석방법을 검토한 결과 분석시간을 폐기물공정시험방법의 분석시간의 2/3정도로 단축시켰고, 검출한계는 0.5 mg/L이었다. 또한, 제안된 신속분석방법을 PCBs 함유 절연유에 적용하였을 경우 규제기준(2.0 mg/L) 부근인 2.35 mg/L에서 과소평가되는 경향이 나타났으며, 이 시험법을 사용하였을 때 PCBs 함유 폐기물의 부적정하게 평가되는 것을 막기 위해 적용 농도범위를 소수첫째자리에서 반올림하여 최소자리수를 일의자리 즉 1 mg/L 이하인 경우(0.5~1.4 mg/L)로 제한하는 것이 바람직한 것으로 나타났다.