References
- Koc, E. and Hooke, C. J., 'Investigation into the Effects of Orifice Size, Offset and Overclamp Ratio on the Lubrication of Slipper Bearing', Tribology Int., Vol. 29, pp. 299-305, 1996 https://doi.org/10.1016/0301-679X(95)00044-5
- Koc, E. and Hooke, C. J., 'Considerations in the Design of Partially Hydrostatic Slipper Bearings', Tribology Int., Vol. 30, pp. 815-823, 1997 https://doi.org/10.1016/S0301-679X(97)00064-9
- Dzodzo, M., Braun, M. J. and Hendricks, R. C., 'Pressure and Flow Characteristics in a Shallow Hydrostatic Pocket with Rounded Pocket/Land Joints', Tribology Int., Vol. 29, pp. 69-76, 1999 https://doi.org/10.1016/0301-679X(95)00036-4
- Manring, N. D., Wray, C. L. and Dong, Z., 'Experimental Studies on the Performance of Slipper Bearings Within Axial-Piston Pumps', Trans. ASME, J. of Tribology, Vol. 126, pp. 511-518, 2004 https://doi.org/10.1115/1.1698936
- Huanlong, L., Jian, K., Guozhi, W., and Lanying, Y., 'Research on the Lubrication Characteristics of Water Hydraulic Slipper Friction Pairs', Proc. IMechE, J. of Engineering Tribology, Vol. 220, pp. 1559-1567, 2006
- Chen, X. D. and He, X. M., 'The Effect of the Recess Shape on Performance Analysis of the Gas-Lubricated Bearing in Optical Lithography', Tribology Int., Vol. 39. pp. 1336-1341, 2006 https://doi.org/10.1016/j.triboint.2005.10.005
- Brajdic-Mitidieri, P., Gosman, A. D., Ioannides, E. and Spides, H. A., 'CFD Analysis of a Low Friction Pocketed Pad Bearing', Trans. ASME, J. of Tribology, Vol. 127, pp. 803-812, 2005 https://doi.org/10.1115/1.2032990
- FLUENT, FLUENT 6.0 Manual, 2002
- 박태조, 전병수, '유압 피스톤 펌프의 피스톤과 실린더 사이의 윤활해석, 제1보 : 피스톤 형상에 의한 영향', 한국윤활학회지, Vol. 14, No. 1, pp. 64-69, 1998
- 박태조, '유압 피스톤 펌프의 피스톤과 실린더 사이의 윤활해석, 제2보 : 피스톤 왕복운동의 영향', 한국윤활학회지, Vol. 17, No. 6, pp. 435-440, 2001