Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)
- Volume 7 Issue 3
- /
- Pages.67-74
- /
- 2008
- /
- 1598-6721(pISSN)
- /
- 2288-0771(eISSN)
The Study on the WEDM of Polycrystalline Diamond
다결정 다이아몬드의 와이어방전가공에 관한 연구
- Published : 2008.09.30
Abstract
Polycrystalline diamonds(PCD) tools are widely used in machining a large variety of advanced materials. However, the manufacture of PCD tool blanks is not an economical process. The shaping of PCD blanks with conventional machining methods(such a grinding) is long, labor-intensive process. This paper reports experimental investigation of the influence of electrical machining conditions on the metal removal rate of WEDM of PCD. Experimental results show that the longer pulse-on time and the shorter pulse-off time increase the metal removal rate and worsen the surface quality. The smaller grain size of diamond yields the metal removal rate and shows the better surface quality. Higher electrical conductivity of water yields worse surface roughness.