Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Optimization Algorithm for Unconstrained Problems Using the Sequential Design of Experiments and Artificial Neural Network

순차적 실험계획법과 인공신경망을 이용한 제한조건이 없는 문제의 최적화 알고리즘 개발

  • 이정환 (성균관대학교 대학원 기계공학부) ;
  • 서명원 (성균관대학교 기계공학부)
  • Published : 2008.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The conventional approximate optimization method, which uses the statistical design of experiments(DOE) and response surface method(RSM), can derive an approximated optimum results through the iterative process by a trial and error. The quality of results depends seriously on the factors and levels assigned by a designer. The purpose of this study is to propose a new technique, which is called a sequential design of experiments(SDOE), to reduce a trial and error procedure and to find an appropriate condition for using artificial neural network(ANN) systematically. An appropriate condition is determined from the iterative process based on the analysis of means. With this new technique and ANN, it is possible to find an optimum design accurately and efficiently. The suggested algorithm has been applied to various mathematical examples and a structural problem.

Keywords

References

  1. Arora, J. S., 1989, Introduction to Optimum Design, McGraw-Hill, New York
  2. Haug, E. J. and Arora, J. S., 1979, Applied Optimal Design, John Wiley & Sons, Inc., New York
  3. Vanderplaats, G. N., 1984, Numerical Optimization Techniques for Engineering Design, McGraw-Hill, New York
  4. Haftka, R. T., Gurdal, Z. and Kamat, M., 1990, Elements of Structural Optimization, Kluwer Academic Publishers, Dordrecht
  5. Kirsch, U., 1981, Optimum Structural Design, McGraw-Hill, New York
  6. Kim, C. W. and Park, T. W., 1994, 'Optimal Design of Mechanisms Using a Least Experimental Plan Method,' Trans. of the KSME(A), Vol. 18, No. 11, pp.2883-2893
  7. Kim, S. J, Park, C. J. and Park, T. W., 1996, 'Suspension Parameter Design Using a Design of Experiments,' Trans. of the KSAE, Vol. 4, No. 1, pp.16-27
  8. Baek, S. H., Lee, D. W., Lee, K. Y., Cho, S. S. and Joo, W. S., 2002, 'Application of Sequential Quadratic Programming on Multi-objective Optimization Using the Stochastic Method,' Spring conference proceedings of the KSME, pp. 954-961
  9. Park, S. H., 2006, Design of Experiments, Min Young Inc., Seoul
  10. Phadke, M. S., 1989, Quality Engineering Using Robust Design, Prentice Hall, New Jersey
  11. Rumelhart, D. F., Hinton, G. E. and Williams, R. J., 1986, 'Learning Internal Representations by Error Propagation,' In Parallel Distributed Processing : Exploration in the Micro-Structure of Cognition, Vol. 1, pp.318-362
  12. Reklaitis, G. V., Ravindran, A., and Ragsdell, K. M., 1983, Engineering Optimization Methods and Applications, John Wiley & Sons, Inc., New York, pp. 123-124
  13. Hock, W. and Schittkowski, K., 1981, Lecture Notes in Economics and Mathematical Systems, Springer-Verlag, New York
  14. Kim, J. M., Lee, J. H., Chun, J. H., Bae, C. H., Hong, H. S. and Suh, M. W., 2007, 'Optimal Rib Structure Design of a B-pillar Trim for Occupant Head Protection,' Spring conference proceedings of the KSAE, Vol. 3, pp.1332-1337

Cited by

  1. Optimum Design based on Sequential Design of Experiments and Artificial Neural Network for Heat Resistant Characteristics Enhancement in Front Pillar Trim vol.30, pp.10, 2013, https://doi.org/10.7736/KSPE.2013.30.10.1079
  2. A Study on the Optimum Design of the Automotive Side Member to Maximize the Crash Energy Absorption Efficiency vol.30, pp.11, 2013, https://doi.org/10.7736/KSPE.2013.30.11.1179
  3. Optimum Design Based on Sequential Design of Experiments and Artificial Neural Network for Enhancing Occupant Head Protection in B-Pillar Trim vol.37, pp.11, 2013, https://doi.org/10.3795/KSME-A.2013.37.11.1397
  4. Development of Optimization Algorithm Using Sequential Design of Experiments and Micro-Genetic Algorithm vol.38, pp.5, 2014, https://doi.org/10.3795/KSME-A.2014.38.5.489