Abstract
In general, water-saturated silt or clay alluvium is characterized with relatively low-resistivity. Thus we often encountered the problem that such a low-resistivity layer is misguided to be good aquifer of high-permeability and low-resistivity in the development of groundwater. This research was conducted with an emphasis on the identification of saturated silt or clay layer from the aquifer by performing the laboratory experiment of IP and resistivity methods on the various materials consisting of alluvium aquifer. Silt or clay layer is found to be characterized with the higher chargeability zone, compared to the sand layer. Regarding the mixture of sand and clay, the higher clay volume, the lower resistivity and the higher chargeability. Subsequently chargeability decreases.
충적층의 구성물질 중에서 포화된 실트 또는 점토층은 다른 층들에 비해 상대적으로 낮은 전기비저항 값을 나타낸다. 따라서 자료해석에 있어서 실트 및 점토층이 전기비저항이 작고 투수성이 높은 대수층으로 오인될 수 있다. 본 연구에서는 이러한 문제를 극복하고 충적층 내 포화된 실트 또는 점토층과 모래 또는 자갈 대수층을 구분하기 위해 충적층을 구설하고 있는 물질의 전기비저항 및 유도분극 값을 함께 측정하는 실내실험을 실시하였다. 실험결과 실트 또는 점토시료가 모래시료보다 충전성이 높게 나타났으며, 또한 모래와 점토 혼합시료에서 점토함량이 증가함에 따라 전기비저항은 감소하고 충전성은 증가하다가 다시 감소하는 경향을 보였다.