참고문헌
- 김기영, 박한규, 전제성 (2005), 'Cemented sand and gravel 재료의 강도특성', 한국지반공학회논문집, Vol.21, No.10, pp.61-71
- 이문주, 최성근, 조용순, 이우진 (2008a), '고경모래의 강도정수와 일축압축강도 관계', 2008 한국지반공학회 봄학술발표회 논문집, pp.14-21
- 이문주, 최성근, 추현욱, 이우진 (2007), '웅력조건에 따른 고결모래의 강도특성 평가', 한국지반공학회논문집, Vol.23, No.5 pp.143-151
- 이문주, 최성근, 추현욱, 조용순, 이우진 (2008b), '낙사법으로 조성원 대형 석고 고결시료의 균질성', 한국지반공학회논문집, Vol.24 No. 1. pp.91-99
- 최성근, 이문주, 추현욱, 홍성진 이우진 (2007), 'Porous plat를 이용한 개성된 레이닝 시스템', 한국지반공학회논문집, Vol.23, No.6. pp.67-76
- Akili. W., and Al-Joulani, N. M. (1988), 'Cune pentration tests on artificially cemented sands', Proceedings of the 1st International Symposium on Penetration Testing, Vol.2, Orlando, Florida, pp. 607-614
- Akili, W. (2006). 'Slatic cone penetration resistance of cemented sands: A laboratory investigation'. Proceedings. GeoCongress 2006, Atlanta, GA, pp.1-6
- AkiH, W., and Torrance, J. K. (1981), 'Thedevelopment and geotechnical problems of sabkha, with preliminary experiments on the static penetration resistance of cemented sands', Quanerly Journal of Engineering Geology and Hydrogeology, Vol.14, No.1, pp.59-73 https://doi.org/10.1144/GSL.QJEG.1981.014.01.05
- Baldi, G., Bellotti, R., Ghionna, V., and Jamiolkowski, M. (1988), 'Stiffness of sands from CPT, SPT and DMT', Proceeding, Penetration Testillg in the UK, Birmingham, pp.299-305. Thomas Telford, London
- Baldi, G., Bellotti, R., Ghionna., V., Jamiolkowski. M., and Pasqualini, E, (1981), 'Cone resistance of a dry medium sand', Proceedings of the 10th International Conferetrce on Soil Mechwlies and Foundation Engineering. Stockholm, Vol.2, 427-432
- Saldi, G., Bcllotti, R., Ghionna, V., Jamiolkowski. M.. and Pasqualini. E. (1986). 'Interpretation of CPTs and CPTUs; second pari: drained penetration of sands', Proceedings of the Fourth Internaional Geotechnical Seminar. Singapore, pp.143- 156
- Been, K., Crooks. J. H, Secker, D. E., and Jefferies. M. G. ( 1986), 'Thc cone penetration test in sand: part l. state parameter interpretation', Geotechnique, Vol.36, No.2. pp.239-249 https://doi.org/10.1680/geot.1986.36.2.239
- Clough, W. G., Sitar N., and Bachus R. (1981), 'Cemented sands under static loading', Journal of Geotechnical Engineering Division. ASCE, Vol.107. No.6. pp.799-817
- Consoli, N. C., Foppa, D, Festugato. L., and Heineck, K. S. (2007), 'Key parameters for strength control of antificially cemented soils', Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.133. No.2, pp.197-205 https://doi.org/10.1061/(ASCE)1090-0241(2007)133:2(197)
- Consoli, N. C., Rotta, G. V., and Prietto. P. D. M. (2000), 'Influence of curing under Stress on the triaxial response of cemented soils'. Geotechnique. Vol.50. No.1, pp.99-105 https://doi.org/10.1680/geot.2000.50.1.99
- Dupas, J., and Peker, A. (1979), 'Static and dynamic properties of sand-cement', Journal of Geotechnical Engineering Division, ASCE, Vol.105. No.3, pp.419-436
- lsmail, M. A., Jaer, H. A .. Sim, W. H., and Randolph, M. F. (2002), 'Effect of cement type on shear behavior of cemented calcareous soil', Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.128. No.6, pp.520-529 https://doi.org/10.1061/(ASCE)1090-0241(2002)128:6(520)
- Jamiolkowski. M., Lo Presti, D. C. F., and Manassero, M. (2003), 'Evaluation of relative density and shear strength of sands from CPT and DMT', Soil Behavior and Soft Ground Construction, ASCE GSP 119, pp.201-238
- Jamiolkowski. M., Ladd. C. C., Germaine. J. T., and Lancellotta, R. (1985). 'New Developments in Field and Laboratory Testing of Soils', Proceedings of the 11th International Conference on Soil Mechanics and Foundation Engineering, San Francisco. pp. 57-153, Balkema, Rotterdam
- Joshi. R. C., Achari. G., Kaniraj. S. R., and Wijeweera. H. (1995). 'Effect of aging on the penetration resistance of sands', Canadian Geotechnical Journal, Vol.32, pp.767-782 https://doi.org/10.1139/t95-075
- Kim. T. J. (2005). Dissipation of porewater pressure due to piezocone penetration in OC clay, Ph.D dissertation. Korea University
- Kulhawy, F. H., and Mayne, P. H. ( 1990), Manual on estimating soil properties for foundation design, Electric Power Researeh Institute, EPRI
- Luune, T., and Christophersen, H. P. (1983), 'Interpretation of cone penetrometer data for offshore sands', Prodings of the Offshore Technology Conference, Richardson. Texas, Paper No.4464
- Parkin, A. K., and Lunne, T. (1982), 'Boundary effects in the laboratory calibration of a cone penetrometer in sand' , Proceeding of 2nd European Symposium on Penteratoin Testing. Orlando, Vol.1. pp.221 -243, Balkema, Rotterdam
- Puppala, A. J., Acar, Y. B., and Senneset, K. (1993). 'Cune penetration in cemented Sands : bearing capacity interpretation, Journal of Geotechnical Engineering, ASCE, Vol.119, No.12, pp. 1990-2001 https://doi.org/10.1061/(ASCE)0733-9410(1993)119:12(1990)
- Puppala, A. J., Acar, Y. B., and Tumay, M. T. (1995). 'Cone penetration in very weakely cemented sand'. Journal of Geotechnical Engineering, ASCE, Vol.121, No.8. pp.589-600 https://doi.org/10.1061/(ASCE)0733-9410(1995)121:8(589)
- Rad. N. S., and Clough.. G. W. (1982), The influence of cementation on the static and dynamic behavior of sands, Report No.59, The John A. Blume Eanhquake Engineering Center, Stanford University, Stanford, Calif
- Rad, N. S., and Tumay, M. T. (1986). 'Effect of cementation on the cone penetration resistance of sand', Use of In Situ Tests in Geotechnical Engineering, GSP 6, ASCE, New York, pp.926-948
- Robertson, P. K., and Campanella, R. G. (1983), 'Interpretation of cone penetrometer test: Pan I: Sand', Canadian Geotechnical Journal, Vol.20. No.4. pp.718-733 https://doi.org/10.1139/t83-078
- Salgado, R., Mitchell, J. K., and Jamiolkowski. M. (1998), 'Calibration chamber size effects on penetration resistance in sand', Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.124. No.9. pp.878-888 https://doi.org/10.1061/(ASCE)1090-0241(1998)124:9(878)
- Schmertmann.. J. H. (1976), An updated correlation between relative density and Fugro type electric cone bearing, Contract Report DACW 9-76-M 6646, Waterways Experiment Station, Vicksburg. Miss
- Schnaid. F. Prietto. P. D. M., and Consoli, N. C. (2001), 'Characterization of cemented sand in triaxial compression', Journal of Geotechnieal Engineering, ASCE, Vol.127, No.10, pp.857-868 https://doi.org/10.1061/(ASCE)1090-0241(2001)127:10(857)
- Sweeney, B. P., and Clough, G. W. (1990), 'Design of a large calibration chamber', Geotechnical Testing Journal, ASTM, Vol.13, No.1, pp.36-44 https://doi.org/10.1520/GTJ10144J