Journal of the Korean Geotechnical Society (한국지반공학회논문집)

Korean Geotechnical Society (한국지반공학회)
권호 표지
DOI QR코드

DOI QR Code

FE Analysis of Rock-Socketed Drilled Shafts Using Load Transfer Method

유한요소해석을 통한 암반에 근입된 현장타설말뚝의 하중전이거동 분석

  • 설훈일 (연세대학교 토목환경공학부) ;
  • 정상섬 (연세대학교 토목환경공학부) ;
  • 김영호 (연세대학교 토목환경공학부)
  • Published : 2008.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The load distribution and deformation of rock-socketed drilled shafts subjected to axial loads are evaluated by a load-transfer method. The emphasis is on quantifying the effect of coupled soil resistance in rock-socketed drilled shafts using the 2D elasto-plastic finite element analysis. Slippage and shear load transfer behavior at the pile-soil interface are investigated by using a user-subroutine interface model (FRlC). It is shown that the coupled soil resistance provides the influence of pile toe settlement as the shaft resistance is increased to an ultimate limit state. The results show that the coupling effect is closely related to the value of pile diameter over rock mass modulus (D/$E_{mass}$) and the ratio of total shaft resistance against total applied load ($R_s$/Q). Through comparisons with field case studies, the 2D numerical analysis reseanably presented load transfer of pile and coupling effect due to the transfer of shaft shear loading, and thus represents a significant improvement in the prediction of load deflections of drilled shafts.

본 연구에서는 유한요소해석을 이용하여 암반에 근입된 현장타설말뚝의 말뚝-지반 상호작용즉, 지반의 연속성을 고려한 하중전이해석을 수행하였다. 이를 위하여 주면 하중전이함수를 사용자 정의의 경계면 모델(FRIC)로 구현하여 말뚝지반의 미끄러짐 거동과 하중전이 거동을 모델링 하였다. 본 연구결과, 주면마찰력에 의해 발생되는 선단침하량으로 대변되는 지반 연속성 영향은 주면마찰력이 극한상태로 도달할 때까지 증가함을 알 수 있었으며, 말뚝직경과 암반계수의 비(D/$E_{mass}$), 전체하중에서 주면마찰력의 비($R_s$/Q)에 영향을 받는 것으로 나타났다. 현장재하시험 사례와의 비교분석 결과, FRIC을 이용한 유한요소해석방법은 말뚝의 하중전이 거동과 말뚝-지반 상호작용 효과(coupling effect)를 적절히 나타낼 수 있었으며, 말뚝의 거동을 예측하는데 크게 개선되었음을 확인하였다.

Keywords

References

  1. 권오성 (2004), Effect of rock mass weathering onresistant behavior of drilled shaft socketed into weathered rock, 서울대학교 박사학위논문
  2. 설훈일 (2007), Load transfer analysis of rock-socketed drilled shafts by considering coupled soil resistance, 연세대학교 박사학위논문
  3. 조성한 (1997), 풍화암에 근입된 현장타설말뚝의 하중전이에 관한 연구, 연세대학교 박사학위 논문
  4. Carter, J.P. and Kulhawy. F.H. (1988), 'Analysis and design of drilled shaft foundations socketed into rock.' Final report, EL 5918/ Project 1493-4 I Electric Power Research Institute, Conell Univ., Ithaca, NY
  5. Coyle, H.M. and Reese, L.C. (1966), 'Load transfer for axially loaded piles in clay.' J Soil Mech. and Found. Div., ASCE, Vol. 92(2). pp. 1-26
  6. Drumm, E.C., Huang, B., He, W., and Zuo, G. (2005). 'Back -Calculation of Rock Socket Friction for Concrete Shafts in Karst.' Proc. 11th Int. Conf. of the Associalion for Computer Methods and Advances in Geomechanics, Turin Italy, June. pp.437-444
  7. Ghionna, V. N., Jamiolkowski. M., Pedroni, S., and Salgado, R. (1994). 'The tip displacement of drilled shafts in sands.' Vertical and horizontal deformations of foundations and embankments. Geotech, Spec Publ. No.40, 2, pp.1039-1057
  8. Hassan, K.M. and O'Neill, M.W. (1997), 'Side load-transfer mechanisms in drilled shafts in soft argillaceous rock.' Journal of Geolechnical and Geoenvironmental Engineering, ASCE. 123(2): 145-152 https://doi.org/10.1061/(ASCE)1090-0241(1997)123:2(145)
  9. Jeong, S.S., Lee. J.H., and Lee. C.J. (2004). 'Slip effect at the pile-soil interface on dragload.' Computers & Geotechnics, Vol. 31. pp.115-126 https://doi.org/10.1016/j.compgeo.2004.01.009
  10. Kim. S. I., Jeong. S.S., Cho, S.H., and Park, I.J. (1999), 'Shear Load Transfer Characteristics of Drilled Shafts in Weathered Rocks.' Journal of Geotechnical and Geoenvironmental Engineering. ASCE, Vol. 125(11), pp.999-1010 https://doi.org/10.1061/(ASCE)1090-0241(1999)125:11(999)
  11. Lee, C.J. (2001), 'The influence of negative skin friction on piles and in pile groups', Ph.D. Thesis, Cambridge University
  12. O'Neill, M.W., Townsend, F.C., Hanssan, K.M., Buller, A. and Chan. P.S. (1996). 'Load transfer for drilled shafts in intermediate geomaterials, FHWA-RD-95-172 Draft report U.S.' Department of Transportation
  13. Seed. H.B. and Reese. L.D. (1957). 'The Action of Soft Clay Along Friction Piles.' Transactions, Vol.122. pp.731-753
  14. Seal, H.I, Jeong, S.S., Cho, C. H., and You. K.H., (2008). 'Shear Load Transfer for Rock-Sotketed Drilled Shafts based on Borehole Roughness and Geological Strength Index (GSI).' International Journal of Rock Mechanics and Mining Sciences. Vol.45, pp.848-861 https://doi.org/10.1016/j.ijrmms.2007.09.008
  15. WilIiams. A.F., Johnston, I.W., and Donald. I.B. (1980), ''The design of socketed piles in weak rock.' Proceedings of international conference on Structural foundations on rock. Balkema, Sydney, pp.327-347
  16. Vesic, A.S. (1977). Design of pile foulldations. 'National Coope- rative Highway Research Program', Synthesis of Praclice No. 42, Transportation Research Borard, Washington, D.C
  17. Zhan. C and Yin, J. (2000). 'Field statie load tests on drilled shaft founded on or sockcted into rock', Canadian Geotech. Journal, Vol.37, pp.1283-1294 https://doi.org/10.1139/cgj-37-6-1283