References
- Yotaro, H., and Takaaki, N., 1995, "Actual Conceptual Design Process for an Intelligent Machining Center," Annals of the CIRP, Vol. 44, No. 1, pp. 123-128 https://doi.org/10.1016/S0007-8506(07)62289-6
- Lee, S. M., Choi, H., Lee, J. C., and Cheong, S. H., 2000, "A Study on the Surface Grinding using the Machining Center (II)," Proceeding of the Korean Society of Precision Engineering Autumn Conference, pp. 880-883
- Park, D. G. and Im, D. S., 2005, "on the Characteristics in Surface Cutting for Face Cutter of Machining Center," Transactions of the Korea Society of Machine Tool Engineers, Vol. 14, No. 2, pp. 21-26
- Kim, S. I. and Cho, J. W., 2004, "Thermal Characteristic Analysis of a High-Speed Horizontal Machining Center with Built-in Motor and Linear Motors," Transactions of the Korea Society of Machine Tool Engineers, Vol. 13, No. 5, pp. 30-37
- Choi, D. B., Kim, S. I., and Song, J. B., 1994, "Air Cooling Characteristics of a High-Speed Spindle System for Machine Tools," Transactions of the Korean Society of Precision Engineering, Vol. 11, No. 1, pp. 123-128
- Kim, S. H., Yoon, K. S., and Lee, M. H., 2003, "Contour Error Analysis and Feed Controller Optimization for Machining Center," Transactions of the Korea Society of Machine Tool Engineers, Vol. 12, No. 3, pp. 17-24
- Cho, B. H. and Seong, H. Y., 1999, "A Study on the Design Optimization of Thickness of Machining center Bed under Dynamic Loading by using Genetic Algorithm," Transactions of the Korea Society of Machine Tool Engineers, Vol. 8, No. 1, pp. 67-73
- Yoon, J. H., Lee, J. W., Jung, K. Y., and Jung, M. S., 1998, "Cutting Condition for Improving Cutting Efficiency and Accuracy by Ball End mill on a Machining Center," Transactions of the Korea Society of Machine Tool Engineers, Vol. 7, No. 3, pp. 99-103