Korea-Australia Rheology Journal

The Korean Society of Rheology (한국유변학회)
권호 표지

Effect of temperature on the rheological properties of dental interocclusal recording materials

  • Published : 2008.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study was to compare rheological properties of six dental interocclusal recording materials and to investigate the effect of temperature on the rheological properties during setting. Five polyvinylsiloxane materials and one polyether material were investigated in this study. The storage modulus (G') and the loss factor ($tan{\delta}$) were measured from 30s after mixing during setting, using the universal dynamic spectrometer. Viscoelastic properties were evaluated by means of G' and $tan{\delta}$ from 5 repeats at $21^{\circ}C$ and $33^{\circ}C$. Individual changes during setting were also evaluated. All data were statistically analyzed using one-way ANOVA and multiple comparison $Scheff{\acute{e}}$ test at the significance level of 0.05. The mean of G was checked at $t_{set}$ (the setting time provided from manufacturer) and $t_{300}$ (the end of experimental time) and the mean of $tan{\delta}$ was checked at to and $t_{set}$. Whereas the increase of the G' value showed generally exponential changes at $21^{\circ}C$, the change of the G' value at $33^{\circ}C$ displayed sigmoidal curves during setting. The change of loss factor $tan{\delta}$ during setting varied. Within the limitations of this study, dental interocclusal recording materials had different viscoelastic properties and most of the materials showed different fluidity at $21^{\circ}C$ and $33^{\circ}C$.

Keywords

References

  1. Abuasi H. A., J. F. McCabe, T. E. Carrick and R. W. Wassell, 1993, Displacement rheometer: a method of measuring working time and setting time of elastic impression materials, J. Dent. 21, 360-366 https://doi.org/10.1016/0300-5712(93)90013-G
  2. Berg J. C. and G. H. Johnson, 2003, Temperature effects on the rheological properties of current polyether and polyvinylsiloxane impression materials during setting, J. Prosthet. Dent. 90, 150-161 https://doi.org/10.1016/S0022-3913(03)00297-X
  3. Braden M., 1967, Rheology of dental composition (impression compound), J. Dent. Res. 46, 620-2 https://doi.org/10.1177/00220345670460032801
  4. Combe E. C. and J. B. Moser, 1978, The rheological characteristics of elastomeric impression materials, J. Dent. Res. 57, 221-226 https://doi.org/10.1177/00220345780570021201
  5. Eyre D., R. van Noort and B. Ellis, 1989, The rheology of silicone rubber impression materials, J. Dent. 17, 171-176 https://doi.org/10.1016/0300-5712(89)90070-5
  6. Inoue K. and H. J. Wilson, 1978a, Viscoelastic properties of elastomeric impression materials. I. a method of measuring shear modulus and rigidity during setting, J. Oral Rehabil. 5, 89-94 https://doi.org/10.1111/j.1365-2842.1978.tb00395.x
  7. Inoue K. and H. J. Wilson, 1978b, Viscoelastic properties of elastomeric impression materials. II. variation of rheological properties with time, temperature and mixing properties, J. Oral Rehabil. 5, 261-267 https://doi.org/10.1111/j.1365-2842.1978.tb01243.x
  8. Inoue K., Wilson H. J., 1978c, Viscoelastic properties of elastomeric impression materials. III. the elastic recovery after removal of strains applied at the setting time, J. Oral. Rehabil. 5, 323-327 https://doi.org/10.1111/j.1365-2842.1978.tb01250.x
  9. Jamani K. D., M. A. Fayyad, E. Harrington and H. J. Wilson, 1988, Temperature changes of materials during impression taking, Br. Dent. J. 165, 129-132 https://doi.org/10.1038/sj.bdj.4806524
  10. Jamani K. D., E. Harrington and H. J. Wilson, 1989, Consistency, working time and setting time of elastomeric impression materials, J. Oral Rehabil. 16, 353-366 https://doi.org/10.1111/j.1365-2842.1989.tb01351.x
  11. Martinez J. E., E. C. Combe and I. J. Pesun, 2001, Rheological properties of vinyl polysiloxane impression paste, Dent. Mater. 17, 471-476 https://doi.org/10.1016/S0109-5641(00)00100-7
  12. McCabe J. F. and A. J. Bowman, 1981, The rheological properties of dental impression materials, Br. Dent. J. 151, 179-183 https://doi.org/10.1038/sj.bdj.4804651
  13. McCabe J. F. and T. E. Carrick, 1989, Rheological properties of elastomers during setting, J. Dent. Res. 68, 1218-1222 https://doi.org/10.1177/00220345890680080101
  14. McCabe J. F. and T. E. Carrick, 1990, Onset of elasticity in setting elastomers, J. Dent. Res. 69, 1573-1575 https://doi.org/10.1177/00220345900690090701
  15. McCabe J. F. and H. Arikawa, 1998, Rheological properties of elastomeric impression materials before and during setting, J. Dent. Res. 77, 1874-1880 https://doi.org/10.1177/00220345980770110301
  16. Mezger T. G.., 2002, The rheology handbook. 5th edition, Vincentz; Stuttgart
  17. Michalakis K. X., A. Pissiotis and V. Anastasiadou, 2004a, An experimental study on particular physical properties of several interocclusal recording media. part I: consistency prior to setting, J. Prosthet. Dent. 13, 42-46
  18. Michalakis K. X., A. Pissiotis and V. Anastasiadou, 2004b, An experimental study on particular physical properties of several interocclusal recording media. part II: linear dimensional change and accompanying weight change, J. Prosthet. Dent. 13, 150-159
  19. Michalakis K. X., A. Pissiotis and V. Anastasiadou, 2004c, An experimental study on particular physical properties of several interocclusal recording media. part III: resistance to compression after setting, J. Prosthet. Dent. 13, 233-237
  20. Ohsawa M. and W. Finger, 1986, Working time of elastomeric impression materials, Dent. Mater. 2, 179-182 https://doi.org/10.1016/S0109-5641(86)80032-X
  21. Omori K. and H. Arikawa, 2001, An evaluation of elastomeric impression materials based on surface compressive strength, J. Oral Rehabil. 28, 320-327 https://doi.org/10.1046/j.1365-2842.2001.00660.x
  22. Vermilyea S. G., E. F. Huget and L. B. Simon, 1978, Extrusion rheometry of fluid materials, J. Dent. Res. 58, 1691-1695
  23. Wilson H. J., 1966, Elastomeric impression materials part I: the setting material, Br. Dent. J. 121, 277-283