DOI QR코드

DOI QR Code

Characteristics of Undrained Cyclic Shear Behavior of Nak-Dong River Sand by Silt Contents

실트질 함유량에 따른 낙동강 모래의 비배수 반복전단거동 특성

  • Kim, Young-Su (Dept. of Civil Engrg., Kyungpook National Univ.) ;
  • Kim, Dae-Man (Dept. of Civil Engrg., Kyungpook National Univ.)
  • 김영수 (경북대학교 토목공학과) ;
  • 김대만 (경북대학교 토목공학과)
  • Published : 2008.11.30

Abstract

In this study, a series of undrained cyclic triaxial tests were performed with three different consolidation stress ratios ($K_c$=1.0, 1.5, 2.0) to investigate the undrained shear strength characteristics of sands with respect to the amount of contained silt located around the basin of Nak-dong River. The test results show that the more the sand has silt, the lower is cyclic shear stress ratio (CSR) in all $K_c$ and that the higher $K_c$ goes, the larger CSR decreases due to the increase of contained silt. The excessive pore pressure caused during shearing has an influence on the decrease of CSR by the high initial pore pressure in proportion to the amount of contained silt regardless of the $K_c$ value. After consolidation, the analysis of the skeleton void ratio of the sample reveals that the main cause of the decrease of CSR as well as the increase of the initial excessive pore pressure is the increase of the skeleton void ratio in proportion to the amount of contained silt.

본 연구에서는 낙동강 유역에 분포하는 모래와 실트를 대상으로 실트 함유량에 따른 모래의 비배수 반복전단강도 특성을 파악하기 위하여 이방압밀비($K_c$=1.0, 1.5, 2.0)를 달리하여 일련의 비배수 반복삼축시험을 실시하였다. 시험결과 모든 $K_c$에서 실트 함유량이 증가함에 따라 반복전단응력비(CSR)가 감소하였으며, $K_c$가 증가할수록 실트 함유량 증가에 의한 CSR의 감소가 더 크게 나타났다. 전단시 발생되는 과잉간극수압은 $K_c$에 관계없이 실트 함유량 증가에 따라 초기 과잉간극수압이 크게 발생되어 CSR의 감소에 영향을 미쳤으며, 또한 압밀 후 시료의 skeleton 간극비를 산정하여 분석한 결과 실트 함유량 증가에 비례하여 전반적으로 skeleton 간극비가 크게 증가하여 초기 과잉간극수압의 증가와 더블어 CSR 감소의 주요원인으로 파악되었다.

Keywords

References

  1. Amini, F., and Qi, G. Z. (2000), "Liquefaction testing of stratified silty sands", Jour. of Geotechnical and Geoenvironmental Engrg., ASCE, Vol.126, No.3, pp.208-217 https://doi.org/10.1061/(ASCE)1090-0241(2000)126:3(208)
  2. Chang, N. Y. (1987), "Liquefaction susceptibility of fine-grained soils preliminary study report", Contract No. DACW3984-M-4230, U.S. Army Corps of Engineers, Washington, D.C
  3. Chang, N. Y. (1990), "Influence of fines content and plasticity on earthquake-induced soil liquefaction", Contract No. DOCW3988-C-0078, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss
  4. El Hosri, M. S., Biarez, H., and Hicher, P. Y. (1984), "Liquefaction characteristics of silty clay", Proceedings of the 8th World Conference on Earthquake Engrg., San Francisco, California, 3, pp.277-284
  5. Erten, D., and Maher M. H. (1995), "Cyclic undrained behavior of silty sand", Soil Dynamics and Earthquake Engrg., Vol.14, No.2, pp.115-123 https://doi.org/10.1016/0267-7261(94)00035-F
  6. Kaufman, L. P. (1981), "Percentage silt content in sands and its effect on liquefaction potential", PhD Thesis, University of Colorado, USA
  7. Koester, J. P. (1993), "Effects of fines type and content on liquefaction potential of low-to-medium plasticity fine-grained soils", Proceedings of the 19th National Earthquake Conference, Central United States Earthquake Consortium Memphis, Tennessee, 1, pp.67-75
  8. Kuerbis, R., Negussey, D., and Vail, Y. P. (1988), "Effect of gradaton and fines content on the undrained response of sand", Geotechnical Special Publication, No.21, pp.330-345
  9. Ladd, R. S. (1978), "Preparing test specimens using undercompaction", Geotechnical Testing Journal, ASTM, Vol.1, No.1, pp.16-23 https://doi.org/10.1520/GTJ10364J
  10. Lee, K. L., and Fitton, J. A. (1969), "Factors affecting the cyclic loading strength of soil", ASTM STP 450, ASTM, pp.71-95
  11. Mohamad, R., and Dobry, R. (1986), "Undrained monotonic and cyclic triaxial strength of sand", Journal of Geotechnical Engrg.Div., ASCE, Vol.112, No.10, pp.941-958 https://doi.org/10.1061/(ASCE)0733-9410(1986)112:10(941)
  12. Poran, J. C., and Rodriguez, J. A. (1989), "Large ground deformations induced by the 1985 earthquake in Port Facilities in Chile", Proceedings form the 2nd US-Japan Workshop on liquefaction, Technical report NCEER-89-0032, pp. 118-130
  13. Seed, H. B., Tokimatsu, K., Harder, L. F., and Chung, R. M. (1985), "Influence of SPT procedures in soil liquefaction resistance evaluations", Jour. of Geotechnical Engrg. Div., ASCE, Vol.3, No.12, pp.1425-1445
  14. Tianqiang, G., and Shamsher, P. (1999), Liquefaction of silts and silt-clay mixtures, Journal of Geotechnical and Geoenvironmental Engrg, ASCE, Vol.125, No.8, pp.706-710 https://doi.org/10.1061/(ASCE)1090-0241(1999)125:8(706)
  15. Tokimatsu, K., and Yoshimi, Y. (1984), "Criteria of soil liquefaction with SPT and fines content", Proceedings of the 8th World Conference on Earthquake Engrg., San Francisco, California, 3, pp.255-262
  16. Troncoso, J. H. (1990), "Failure risks of abandoned tailings dams", Proceedings of International Symposium on Safety and Rehabilitation of Tailing Dams, Paris, pp.82-89
  17. Tuttle M., Law, T., Seeber, L., and Jacop, K. (1989), "Liquefaction and ground failure in Ferland, Quebec triggered by the 1988 Saguenay earthquake", Proceedings form the 2nd US-Japan Workshop on liquefaction, Technical report NCEER-89-0032, pp.102-117
  18. Uchida, K., and Hasegawa, T. (1986), "Strength-deformation characteristics of a soil subjected to initial shear stress", Soils and Foundations, Vol.26, No.1, pp.11-24 https://doi.org/10.3208/sandf1972.26.11
  19. Vasquez-Herrera, A., and Dobry, R. (1989), "The behavior of undrained contractive sand and its effects on seismic liquefaction flow failures of earth structures", Contract No. 86-003, Department of Army, U.S. Army Corps of Engineers, Washington, D.C