Performance Evaluation of a Fin-Tube Heat Exchanger Using One-Dimensionalized Refrigerant Circuit

냉매유로를 1차원 배열화한 휜-관 열교환기 성능해석

  • Kim, Doo-Hwan (School of Mechanical Engineering, Hanyang University) ;
  • Ye, Huee-Youl (School of Mechanical Engineering, Hanyang University) ;
  • Lee, Kwan-Soo (School of Mechanical Engineering, Hanyang University) ;
  • Cha, Woo-Ho (Air conditioning division, LS Mtron)
  • Published : 2008.12.10

Abstract

A new method is presented for developing a simulation program which can analyze the heat transfer characteristics of fin-tube heat exchanger. This method is able to describe several types of refrigerant circuit arrangement. The delivery path of air and refrigerant properties is simplified by transforming three-dimensional array into one-dimensional array. By comparing simulated results with experiment results, the deviation was 8.2%. Several fin-tube heat exchangers of different design factors and operating conditions were simulated using this program. It was shown that this program could be used for designing practical fin-tube heat exchangers.

Keywords

References

  1. P. A. Domanski, 1991, Simulation of an evaporator with non-uniform one-dimensional air distribution, ASHRAE Transactions, pp. 793-802
  2. J. H. Lee, S. W. Bae, K. H. Bang and M. H. Kim, 2002, Experimental and numerical research on condenser performance for R22 and R407C refrigerants, Int J Refrigeration, Vol. 27, pp. 372-382
  3. X. Jia, C. P. Tso and P. K. Chia, 1995, A distributed model for prediction of the transient response of an evaporator, Int J Refrigeration, Vol. 18, pp. 336-342 https://doi.org/10.1016/0140-7007(95)00015-4
  4. J. Judge and R. Radermacher, 1997, A heat exchanger model for mixtures and pure refrigerant cycle simulations, Int J of Refrigeration, Vol. 20, pp. 244-255 https://doi.org/10.1016/S0140-7007(97)00010-8
  5. J. M. Hill and S. M. Jeter, 1991, A Linear subgrid cooling and dehumidification coil model with emphasis on mass transfer, ASHRAE Transactions, pp. 118-128
  6. J. Liu, W. J. Wei and G. L. Ding, 2004, A general steady state mathematical model for fin-and-tube heat exchanger based on graph theory, Int J of Refrigeration, Vol. 27, pp. 965-973 https://doi.org/10.1016/j.ijrefrig.2004.06.008
  7. M. C. Kuo, H. K. Ma, S. L. Chang and C. C. Wang, 2006, An algorithm for simulation of the performance of air-cooled heat exchanger applications subject to the influence of complex circuitry, Applied Thermal Engineering, Vol. 26, pp. 1-9 https://doi.org/10.1016/j.applthermaleng.2005.04.022
  8. NIST REFPROP V6.0, National Institute of Standards and Technology, USA
  9. ASHRAE handbook fundamentals, ASHRAE, 2002
  10. C. C. Wang, C. J. Lee, C. T. Chang and S. P. Lin, 1999, Heat transfer and friction correlation for compact louvered fin-and-tube heat exchangers, Int J of Heat and Mass Transfer, Vol. 42, pp. 1945-1956 https://doi.org/10.1016/S0017-9310(98)00302-0
  11. Y. Seshimo and M. Fujii, 1991, An experimental study of the performance of plate fin and tube heat exchangers at low Reynolds numbers, ASME/JSME Thermal Engineering Proceedings, Vol. 4, pp. 449-454
  12. J. B. Copetti, M. H. Macagnan, D. Souza, and R. C. Oliveski, 2004, Experiments with micro-fin tube in single phase, Int J of Refrigeration, Vol. 27, pp. 876-883 https://doi.org/10.1016/j.ijrefrig.2004.04.015
  13. M. Goto, N. Inoue and R. Yonemoto, 2003, Condensation heat transfer of R410 inside internally grooved horizontal tubes, Int J of Refrigeration, Vol. 26, pp. 410-416 https://doi.org/10.1016/S0140-7007(02)00153-6
  14. T. C. Carnavos, 1980, Heat transfer performance of internally finned tube, Heat Transfer Engineering, Vol. 4, p. 32
  15. C. C. Kuo and C. C. Wang, 1996, In tube evaporation of HCFC-22 in a 9.52 mm micro/ smooth tube Int J of Heat and Mass Transfer, Vol. 39, pp. 2259-2269
  16. H. Haraguchi, S. Koyama, J. Esaki and T. Fujii, 1993, Condensation heat transfer of refrigerants HFC-134a, HCFC-123 and HCFC-22 in horizontal smooth tube and a horizontal microfin tube, Proceedings of 30th National Symposia of Japan Yokohama, pp. 343-345
  17. H. Ito, 1960, Pressure losses in smooth pipe bends. Basic Engineering, Transaction of AMSE, Vol. 3, p. 135
  18. B. Pierre, 1964, Flow resistance with boiling refrigerants part II, ASHRAE Journal, pp. 73-77
  19. C. D. Kim, C. D. Jeon and J. H. Lee, 2004, Evaluation of Air-side Heat Transfer and Friction Characteristics on Design Conditions of Condenser, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 16, No. 1, pp. 42-53