대한안전경영과학회지 (Journal of the Korea Safety Management & Science)

  • 제10권4호
  • /
  • Pages.121-126
  • /
  • 2008
  • /
  • 1229-6783(pISSN)
  • /
  • 2288-1484(eISSN)
대한안전경영과학회 (Korea Safety Management & Science)
권호 표지

실험 계획법을 이용한 $Al(OH)_3$ 첨가량에 따른 고무의 난연 특성 연구

The Study on the Flame Retardancy of Rubber according to $Al(OH)_3$ Addition Using Experimental Design Method

  • 민영초 (명지대학교 산업경영공학과) ;
  • 강윤진 (명지대학교 산업경영공학과) ;
  • 김기영 (명지대학교 산업경영공학과) ;
  • 강경식 (명지대학교 안전경영연구소)
  • Min, Young-Cho (Department of Industrial and Management Engineering, Myongji University) ;
  • Kang, Yun-Jin (Department of Industrial and Management Engineering, Myongji University) ;
  • Kim, Ki-Young (Department of Industrial and Management Engineering, Myongji University) ;
  • Kang, Kyong-Sik (Safety Management Laboratory, Myongji University)
  • 발행 : 2008.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The effect of $Al(OH)_3$ on physical, thermal, and retardant property of rubber was studied. It was analyzed by statistical experimental design method with one way array to confirm the effect of factors. Physical characteristics, thermal pyrolysis temperature, and combustion time were considered as the properties. The amount of $Al(OH)_3$ addition was chosen as significant parameter. As the result of ANOVA analysis, thermal pyrolysis temperature increased and combustion time decreased with increasing of $Al(OH)_3$.

키워드

참고문헌

  1. D. K. Kim, S. D. Seul, and J. E. Sohn, J. Kor. Ins. of Rubb. Ind., 22, 324 (1987)
  2. D. J. Moon, D. K. Kim, and S. D. Seul, J. Kor. Ins. of Rubb. Ind., 24, 11 (1989)
  3. J. U. Lee, W. K. Kim, and B. H. Kim, J. Kor. Ins. of Rubb. Ind., 21, 121 (1986)
  4. R. P. Quirk, Rubber Chemistry and Technology. 57, 557 (1984) https://doi.org/10.5254/1.3536020
  5. S. Cesca, Polym. Sci., 32, 1 (1979) https://doi.org/10.1002/pol.1958.1203212401
  6. D. Barnard, Kausch Gumikunstst, 35, 747 (1982)
  7. D. W. Shin and C. S. Hong, J. Kor. Ins. of Rubb. Ind., 30(4) (1995)
  8. KS M 6518, 가황고무 물리시험 방법
  9. G. Holden, N. R. Legge, R. Quirk, and H. E. Schroeder, Thermoplastic Elastomers, 1, Hanser/Gardner, 1996