Health and Safety Executive, "Train derailment at Hatfield - 17 October 2000 Second HSE interim report", Office of Rail Regulation, 2001
Rail Safety & Standards Board, "Management and understanding of rolling contact fatigue", 2006
UIC Code 712, "Rail defects", International Union of Railway, 2002
J.W. Ringsberg, "Life prediction of rolling contact fatigue crack initiation" , International Journal of Fatigue, vol.23, 2001, pp.575-586https://doi.org/10.1016/S0142-1123(01)00024-X
K. Dang Van, G. Caillet'몃, B.F. Flavenot et ai, "Criterion for high cycle fatigue failure under multiaxialloading", Biaxial and Multiaxial Fatigue, 1989, pp.459-478
J.A. Bannantine, J.J. Comer, "Fundamentals of metal fatigue analysis", Prenticd Hall, 1990
W.R. Tyfour, H.H, Beynon, A,Kapoor, "The steady state wear behavior of pearlitic rail steel under dry rolling-sliding contact conditions", Wear, vol. 197, 1996, pp.79-89
D.Y. Jeong, "Analytical modelling of rail defects and its applications to rail defect management", U.S. Dept. of Transportation, 2003
CHERMEC, "Trennial report 2006" , Chalmers University of Technology, 2006
J. Jaiswal, S. Blair and S. lwnlcki, "A system approach to evaluating rail life", http://www.railtechnologyunit.com
M.C. Bustow, A.S. Watson and M. Beagles, "Simulation of rail wear and rolling contact fatigue using the whole life rail model" , Railway Engineering, 2003
D.I. Fletcher, J.H Beynon, "Equilibrium of crack growth and wear rates during unlubricated rolling-sliding contact of peralitic rail steel" , IMechE, 2000, pp.93-105
D.Y. Jeong, "Progress in rail integrity research" , U.S. Dept of Transportation, 2001
H. Chen, M. Ishida, "Influence of rail surface roughness formed by rail grinding on rolling contact fatigue", QR of RTRI, Vol, 47, No. 4, 2006
S. Fukagai, T.Ban, M. Ogata, M. Ishida, A.Namura, "Development of wheel/rall friction moderating system(FRIMOS)", OR of RTRI, vol. 49, No. 1, 2008
T. Deshimaru, H. Kataoka and N. Abe, "Estimation of service life of aged continuous welded rail", OR of RTRI, vol, 47, No.4, 2006
M. Ishida and Y. Satoh, "Development of rail/wheel high speed contact fatigue testing machine and experimental results" , OR of RTRI, vol.2, No.5, 1988
M. Takikawa, Y.lriya, "Laboratory simulations with tein-disc machine on head check", Institute of Material Engineering Austral asia, 2006
H.Chen, T.Ban, M.lshida, T. Nakahara, "Experimental investigation of influential factors on adhesion between wheel and rail under wet conditions", Institute of Material Engineering Austral asia, 2006
김청균, 김기환, "고속전철용레일-휠 접촉에서 응력분포에 관한 유한요소해석", 한국윤활학회지 제13권 제3호, 1997.9, pp. 93-101
김청균, "레일-휠의 접촉면 경사도에 따른 응력-변위량의 거동특성에 관한연구", 한국철도학회지 제7권 제3호, 2004. 9, pp. 70 - 76