참고문헌
- Dao, M. et al., 2001, 'Computational Modeling of the Forward and Reverse Problems inInstrumented Sharp Indentation,' Acta materialia, Vol. 49, pp.3899-3918 https://doi.org/10.1016/S1359-6454(01)00295-6
- Lee, H. I., et al, 2005, 'A Numerical Approach Indentation Technique for Material Property Evaluation,' Journal of the Mechanics and Physics of Solids, 53, pp. 2037~2069 https://doi.org/10.1016/j.jmps.2005.04.007
- Pelletire, H., et. al, 2006, 'Characterization of Mechanical Properties of Thin Films UsingNanoindentation test,' Mechanics of materials, Vol. 38, pp. 1182~1198 https://doi.org/10.1016/j.mechmat.2006.02.011
- Zeng, K. and Chiu, C., 2001 'An Analysis of Load-Prenetration Curves from Instrumented Indentation,' Acta materialia, Vol. 49, pp. 3539~3551 https://doi.org/10.1016/S1359-6454(01)00245-2
- Rieth, M. and Schommer, W., 2004, Handbook of Theoretical and Computational Nanotechnology, Vol. 4, ASP, Stvenson Ranch, California 91381-1439, USA, pp. 387~461
- Fischer-Cripps A. C., 2002, Nanoindentation, Vol. 1, Springer-Verlag, NewYork, pp. 90~95
- Cheng, Y. T. and Cheng, C. M., 2004, 'Scaling, Dimensional, and Indentation Measurements,' Material science and Engineering R 44, pp. 91~149 https://doi.org/10.1016/j.mser.2004.05.001
- Giannakopoulos, A. E. and Suresh, S., 1999, 'Determination of Elastoplastic Properties by Instrumented Sharp Indentation,' Scripta materialia, Vol. 40, No. 10, pp. 1191~1198 https://doi.org/10.1016/S1359-6462(99)00011-1
- Bucaille, J. L. et al, 2003, 'Determination of Plastic Properties of Metals by Instrumented Indentation Using Different Sharp Indenters,' Acta materialia, Vol. 51, pp. 1663~1678 https://doi.org/10.1016/S1359-6454(02)00568-2
- Chollacoop, N. et al, 2003, 'Depth-Sensing Instrumented Indentation with Dual Sharp Indenters,' Acta Meterialia, Vol. 51, pp. 3713~3729 https://doi.org/10.1016/S1359-6454(03)00186-1
- Tunvisut, K. et al., 2001, 'Use of Scaling Functions to Determine Mechanical Properties of Thin Coatings from Microindentation Tests,' International Journal of Solids and Structures, Vol. 38, pp. 335~351 https://doi.org/10.1016/S0020-7683(00)00017-2
- Cao, Y, P. and Lu, J., 2004, 'A New Method to Extract the Plastic Properties of Metal Materials from an Instrumented Spherical Indentation Loading Curve,' Acta materialia, Vol. 52, pp. 4023~4032 https://doi.org/10.1016/j.actamat.2004.05.018
- Swaddiwudhipong, S. et al., 2005, 'Material Characterization Based on Dual Indenters,' International Journal of Solids and Structures, Vol. 42, pp. 69~83 https://doi.org/10.1016/j.ijsolstr.2004.07.027
- Ogasawara, N., 2005, 'Representative Strain of Indentation Analysis,' Journal of Material Research, Vol. 20, No. 8, pp. 2225~2234 https://doi.org/10.1557/JMR.2005.0280
- Ogasawara, N. et al., 2006, 'Measuring the Plastic Properties of Bulk Materials by Singles Indentation Test,' Scripta Materialia, Vol. 54, pp. 65~70 https://doi.org/10.1016/j.scriptamat.2005.09.009
- Yan, J. et al., 2007, 'Determining Plastic Properties of a Material with Residual Stress by Using Conical Indentation,' International Journal of Solids and Structures, Vol. 44, pp. 3720~3737 https://doi.org/10.1016/j.ijsolstr.2006.10.017
- Antunes, J. M. et al., 2007, 'A New Approach for Reverse Analyses in Depth-Sensing Indentation Using Numerical Simulation,' Acta Materialia, Vol. 55, pp. 69~81 https://doi.org/10.1016/j.actamat.2006.08.019
- Lee, J, H. et al., 2007, 'A Numerical Approach to Indentation Techniques for Thin-Film Property Evaluation,' Journal of KSME Part A, Vol. 31, No. 3, pp. 313~321 https://doi.org/10.3795/KSME-B.2007.31.4.313
- Tabor, D., 2000, The Hardness of Metals Published in the Oxford Classics series 2000, Oxford University Press, New York
- Johnson, K. L., 1985, 'Contact Mechanics,' Cambridge University Press, London
- Oliver, W. C. and Pharr, G. M., 1992, 'An Improved Technique for Determining Hardness and Elastic-Modulus Using Load and Displacement Sensing Indentation Experiments,' Journal of Materials Research, Vol. 7, No. 6, pp. 1564~1583 https://doi.org/10.1557/JMR.1992.1564
- Oliver, W. C. and Pharr, G. M., 2004, 'Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology,'Journal of Materials Research, Vol. 19, No. 1, pp. 3~20 https://doi.org/10.1557/jmr.2004.0002
- Fischer-Cripps, A, C., 2000, 'A Review of Analysis Methods for Sub-Micron Indentation Testing,' Vacuum, Vol. 58, pp. 569~585 https://doi.org/10.1016/S0042-207X(00)00377-8
피인용 문헌
- Evaluation of Adhesive Properties Using Cohesive Zone Model : Mode I vol.33, pp.5, 2009, https://doi.org/10.3795/KSME-A.2009.33.5.474
- Estimations of work hardening exponents of engineering metals using residual indentation profiles of nano-indentation vol.24, pp.1, 2010, https://doi.org/10.1007/s12206-009-1115-8