Design Circuit Parameter Estimation of Impulse Generator and its application to 10/350${\mu}s$ Lightning Impulse Current Generator

임펄스 발생기의 회로 설계 파라미터 예측계산과 10/350${\mu}s$ 뇌임펄스 전류발생기 적용

  • Published : 2008.10.01

Abstract

This paper presents design parameter calculation methodology and its realization to construction for the 10/350${\mu}s$ lightning impulse current generator(ICG) modelled as double exponential function waveform with characteristic parameters ${\alpha},{\beta}$. Matlab internal function, "fzero" was applied to find ${\lambda}={\alpha}/{\beta}$ which is solution of nonlinear equation linearly related with two wave parameter $T_1$ and $T_2$. The calculation results for 10/350${\mu}s$ lightning impulse current show very good accuracy with error less 0.03%. Two type of 10/350${\mu}s$ ICGs based on the calculated design circuit parameters were fabricated by considering the load variation. One is applicable to the MOV based Surge protective device(SPD) for less 15 kA and the other is to test small resistive devices such as spark gap arrester and bonding device with maximum current capability 30 kA. The tested waveforms show error within 10% in comparison with the designed estimation and the waveform tolerance recommended in the IEC 61643-1 and IEC 60060-1.

Keywords

References

  1. IEEE Std. C62.45-2OO2, "IEEE recommended practice on surge testing for equipment connected to low-voltage (1000 and Less) AC power circuits"
  2. IEC 61643-1-2002, "Surge protective devices connected to low-voltage power systems - Part 1: performance requirements and testing methods"
  3. IEC 62305-1-2006, "Protection against lightning -Part 1: General principles", pp. 89
  4. I. Kuzhekin and Z. Hribar, "Impulse current generator for EMC tests of structures", IEEE Inter. Symp, on EMC 2003, Vol.1, pp. 241-243, May 2003
  5. 일본전기학회, "절연시험법 Hand book", pp. 50-51, 1976.7
  6. C. Mao and H. Zhou, "Novel parameter estimation of double exponential pulse (EMP, UWB) by statistical means", IEEE Trans. On EMC, Vol. 50, No. 1, pp. 97-100, Feb. 2008
  7. D.B.Mongomery, "Solenod Magnet Design", Robert R. Kriger Pubblishig Company, pp.194, 1980
  8. H. A. Wheeler, "Inductance formulas for circular and square coils", Proceed. of The IEEE, Vol. 70, No. 12, pp. 1459-1450. Dec. 1982