References
-
Joseph J. F. Manwell, J. G. McGowan, A. L. Rogers, 'Wind Energy Theory, Design and Application,' John Wiley & Sons,
$1^{st}$ Ed., 2002 - Yicheng Chen, Pragasen Pillay, Khan.A., 'PM wind generator comparison of different topologies,' Proc. of 39th IAS Annual Meeting Conference, Vol. 3, No. 3-7, pp. 1405-1412, October 2004
- Khan M.A, Pillay, P. Malengret, 'Impact of directdrive WEC Systems on the design of a small PM wind generator,' Proc of IEEE Power Tech Conference, Vol. 2, pp. 23-26, June 2003
- Wang Fengxiang, Hou Qingming, Bo Jianlong, Pan Jian, 'Study on Control System of Low Speed PM Generator Direct Driven by Wind Turbine,' Proc. of ICEMS2005, Vol. 2, No. 27-29, pp. 1009-1012, September, 2005
- Donald S.Zinger et al., 'Annualized Wind Energy Improvement Using Variable Speeds,' IEEE Transactions on Industry Applications, Vol. 33, pp. 1444-1447, November, 1997 https://doi.org/10.1109/28.649954
- H.S. Choi et al., 'A Distributed Computing Technique for Analysis of Electric Machines Using Internet Web Services,' Digest of CEFC2004, pp. 124, June 6-9, 2004
- A. Esoposito and L. Tarricone, 'Grid Computing for Electromagnetics: A Beginner's Guide with Applications,' IEEE Antennas and Propagation Magazine, Vol. 45, No. 2, pp. 91-99, April 2003 https://doi.org/10.1109/MAP.2003.1203124
- Chang-Eob Kim, 'Optimum Design of a Linear Induction Motor Using Genetic Algorithm, Niching GA and Neural Network,' KIEE International Transactions on EMECS, Vol. 3, no. 3, pp. 128-132, September 2003
- Anders Grauers, 'Design of Direct-driven Permanentmagnet Generators for Wind Turbines,' Ph.D. Thesis Chalmers University, October 1996
Cited by
- PHLIS-Based Characteristics Analysis of a 2 MW Class Tidal Current Power Generation System vol.31, pp.8, 2014, https://doi.org/10.7736/KSPE.2014.31.8.665
- Optimal Design of a MW Class SCSG for a Tidal Current Power Generation System vol.10, pp.6, 2015, https://doi.org/10.5370/JEET.2015.10.6.2271
- Optimal Design of a Novel Permanent Magnetic Actuator using Evolutionary Strategy Algorithm and Kriging Meta-model vol.9, pp.2, 2014, https://doi.org/10.5370/JEET.2014.9.2.471
- Designs of 10 MW Air-core and Iron-core HTS Wind Power Generators vol.10, pp.2, 2015, https://doi.org/10.5370/JEET.2015.10.2.545
- Modularization of the HTS Field Coils for a Large-Scale Superconducting Generator vol.26, pp.3, 2016, https://doi.org/10.1109/TASC.2016.2528986
- Minimization of a Cogging Torque for an Interior Permanent Magnet Synchronous Machine using a Novel Hybrid Optimization Algorithm vol.9, pp.3, 2014, https://doi.org/10.5370/JEET.2014.9.3.859
- Characteristic analysis and design of a novel lorentz force driving actuator for a molded case circuit breaker vol.9, pp.1, 2015, https://doi.org/10.1049/iet-epa.2013.0314
- Induced Current-Based Performance Measurement System for Wide and Stacked HTS Wires vol.25, pp.3, 2015, https://doi.org/10.1109/TASC.2015.2390294
- Structural Design of a Module Coil for a 12-MW Class HTS Generator for Wind Turbine vol.27, pp.4, 2017, https://doi.org/10.1109/TASC.2017.2669155
- Irreversible Demagnetization of Permanent Magnet in a Surface-Mounted Permanent Magnet Motor With Overhang Structure vol.52, pp.4, 2016, https://doi.org/10.1109/TMAG.2015.2476782
- Multi-objective design optimization of a large-scale directdrive permanent magnet generator for wind energy conversion systems vol.8, pp.2, 2014, https://doi.org/10.1007/s11708-014-0320-z
- Optimal Design of a Direct-Drive Permanent Magnet Synchronous Generator for Small-Scale Wind Energy Conversion Systems vol.16, pp.4, 2011, https://doi.org/10.4283/JMAG.2011.16.4.379