Journal of Electrical Engineering and Technology

  • 제3권4호
  • /
  • Pages.538-545
  • /
  • 2008
  • /
  • 1975-0102(pISSN)
  • /
  • 2093-7423(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

Torque Control Strategy for High Performance SR Drive

  • Ahn, Jin-Woo (Dept. of Electrical and Mechatronics Engineering, Kyungsung University)
  • 발행 : 2008.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper attempts to summarize torque control strategy for high performance SR drive. There are primarily two strategies for torque control. One method is direct torque control, which uses the simple control scheme and hysteresis controller to reduce the torque ripple. Another method is indirect torque control, which uses the complicated algorithms or simple distribution function to distribute each phase torque and obtain current command. The current controller is used to control phase torque by a given current command. In order to compare these two strategies of torque control, five torque control methods are introduced. The advantages and disadvantages of each method are presented. At last, they are verified by some simulations and experimental results.

키워드

참고문헌

  1. P. J. Lawrenson, J. M. Stephenson, T. T. Blenkinsop, J. Corda, and N. N. Fulton, 'Variable-speed reluctance motors,' in Proc. IEEE, Pt. B, Vol. 127, No. 4, July 1980, pp. 253-265
  2. J.W. Ahn, S.J. Park, and D.H. Lee, 'Hybrid excitation of SRM for reduction of vibration and acoustic noise,' IEEE Trans. on Industrial Electronics, Vol. 51, No. 2, April 2004, pp. 374-380 https://doi.org/10.1109/TIE.2004.825227
  3. Inderka, R.B., De Doncker, R.W., 'DITC-direct instantaneous torque control of switched reluctance drives', 37th IAS Annual Meeting. Vol. 3, Oct. 2002, pp. 1605-1609
  4. Fuengwarodsakul, N.H., Menne, M., Inderka, R.B., De Doncker, R.W., 'High-Dynamic Four-Quadrant Switched Reluctance Drive Based on DITC', Industry Applications, IEEE Transs. on, Vol. 41, Issue 5, Sept.-Oct. 2005, pp. 1232-1242 https://doi.org/10.1109/TIA.2005.853381
  5. Sahoo, S.K., Panda, S.K., Xu, J.X., 'Iterative learning control based direct instantaneous torque control of switched reluctance motors', in Conf. ESC2004 IEEE 35th Annual Meeting, Vol.6, June 2004, pp. 4832-4837
  6. R.S. Wallace and D.G. Taylor, 'A balanced commutator for switched reluctance motor to reduce torque ripple,' IEEE Trans. Power Electron., Vol. 7, pp. 617-626, July 1992 https://doi.org/10.1109/63.163641
  7. I. Husain, 'Minimization of torque ripple in SRM drives' Industrial Electronics, IEEE Transactions on, Vol. 49, Issue 1, Feb. 2002, pp. 28-39 https://doi.org/10.1109/41.982245
  8. I. Husain and M. Eshani, 'Torque ripple minimization in switched reluctance motor drives by PWM current control,' in Proc. IEEE PESC'94, Vol. 1, 1994, pp. 72-77
  9. Schramm, D.S., B.W. Williams, and T.C. Green, 'Torque ripple reduction of switched reluctance motors by phase current optimal profiling', IEEE Power Electronics Specialist Conf., 1992, pp. 857-860
  10. S. Mir, M. Elbuluk, and I. Husain, 'Torque ripple minimization in switched reluctance motors using adaptive fuzzy control,' in Conf. Rec. IEEE-IAS Annu. Meeting, Vol. 1, 1997, pp. 571-578
  11. R.B. Inderka and R.W. De Doncker, 'High dynamic direct average torque control for switched reluctance drives,' in Conf. Rec. IEEE-IAS Annu. Meeting, Vol. 3, Chicago, IL, 2001, pp. 2111-2115
  12. D-H, Lee; Z-G, Lee; J-W, Ahn, 'Instantaneous Torque Control of SRM with a Logical Torque Sharing Method,' Power Electronics Specialists Conference, 2007. 17-21 June 2007 pp. 1784-1789
  13. J.N. Liang; D.H. Lee, J.W. Ahn, Y.J. An, 'A Novel 4-Level Converter for High Speed SR Drive', in Conf. PESC '06. 37th IEEE, 18-22 June 2006, pp. 1-6

피인용 문헌

  1. Magnetic Shield Design Between Interior Permanent Magnet Synchronous Motor and Sensor for Hybrid Electric Vehicle vol.45, pp.6, 2009, https://doi.org/10.1109/TMAG.2009.2018684
  2. Minimization of Torque-Ripple in Switched Reluctance Motors Over Wide Speed Range vol.9, pp.2, 2014, https://doi.org/10.5370/JEET.2014.9.2.478
  3. Analysis of advantages of reactive electric machines in propulsion system construction vol.17, pp.2, 2017, https://doi.org/10.14529/power170202