DOI QR코드

DOI QR Code

A Study on Mount Vibration Reduction of a Centrifugal Turbo Blower for FCEV

FCEV용 원심형 터보 블로워의 마운트 진동 저감에 관한 연구

  • 김윤석 (인하대학교 대학원 기계공학과) ;
  • 이상권 (인하대학교 기계공학과)
  • Published : 2008.10.20

Abstract

A centrifugal turbo blower of the fuel cell electric vehicle (FCEV) operates at very high speed above 30000 rpm in order to increase the pressure of the air, which supplied to a stack of FCEV, using rotation of its impeller blades. Vibration which originated from the blower is generated by unbalance of mechanical components, rotation of bearings and rotating asymmetry that rotate at high speed. The vibration is transmitted to receiving structure through vibration isolators and it can causes serious problems in the noise, vibration and harshness(NVH) performance. Thus, the study about reducing this kind of vibration is an important task. In this paper, dynamic analysis of the blower executed by numerical simulation and experimental analysis of the blower is also performed. Then, measured and simulated results are compared in order to validate of the simulation. Finally, reducing vibration through modifying mount stiffness is the main purpose of this paper.

Keywords

References

  1. Yang, W. -C., 2002, "Fuel Cell Electric Vehicles: Recent Advances and Challenges", International Journal of Automotive Technology, Vol. 1, No. 1, pp. 9-16
  2. Larminie, J. and Dicks, A., 2002, "Fuel Cell Systems Explained(2nd ed.)", Wiley
  3. Vielstich, W., Lamm, A. and Gasteiger, H. A., 2003, "Handbook of Fuel Cells: Fundamentals", Technologies and Applications Vol. 4, Wiley
  4. Goodwin, M. J., 1989, "Dynamics of Rotorbearing Systems", Unwin
  5. Genta, G., 1998, "Vibration of Structures and Machines", Springer
  6. Xu, M. and Maragoni, R. D., 1994, "Vibration Analysis of a Motor-flexible Coupling-rotor System Subject to Misalignment and Unbalance: Part I, II", Journal of Sound and Vibration, Vol. 176, pp. 663-691 https://doi.org/10.1006/jsvi.1994.1405
  7. Harsha, S. P., 2006, "Nonlinear Dynamic Analysis of a High-speed Rotor Supported by Rolling Element Bearing", Journal of Sound and Vibration, Vol. 290, pp. 65-100 https://doi.org/10.1016/j.jsv.2005.03.008
  8. Lee, S. K., 2000, "Application of the Vibrational Power Flow to a Passenger Car for Reduction of Interior Noise", Shock and Vibration, Vol. 7, pp. 277-285 https://doi.org/10.1155/2000/619326
  9. MSC.Software, 2005, "MSC.ADAMS Basic Full Simulation Package Training Guide", MSC.Software Corp., USA
  10. Lee, J. H., Lee, S. K., Kim, S. J. and Kim, T. Y., 2006, "Analysis of Excitation Forces for the Prediction of the Vehicle Interior Noise by the Powertrain", Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 16, pp. 1244-1251 https://doi.org/10.5050/KSNVN.2006.16.12.1244
  11. Johnson, K. L., 1987, "Contact Mechanics", Cambridge University Press
  12. Muszynka, H. A., 2005, "Rotordynamics", Taylor & Francis
  13. Brandlein, J., Eschmann, P., Hasbargen, L. and Weigand, K., 1999, "Ball and Roller Bearings Theory, Design and Application(3rd ed.)", Wiley
  14. Yamanouchi, K., Yamashita, K., Mamiya, N., Yamazaki, T. and Yamazaki, I., 1994, "Application of Prediction Noise and Vibration Analysis to the Development of a New- Generation Lightweight 3-Liter V6 Nissan Engine", SAE, Vol. 103, 940993
  15. Yu, Y., Naganathan, N. G. and Dukkipati, R. V., 2001, "A Literature Review of Automotive Vehicle Engine Mounting System", Mechanism and Machine Theory, Vol. 36, pp. 123-142 https://doi.org/10.1016/S0094-114X(00)00023-9
  16. Lee, C. W., Chung, K. R., Lee, J. C. and Kwak, Y. K., 1986, "Computer Simulation for Design of Minimum Vibration Mount System in Variable Displacement Engine", Journal of the KSME, Vol. 3, pp. 305-315
  17. Tohara, H., 1975, "Rubber Vibration Isolator", Japan Gendai Kogakusya