DOI QR코드

DOI QR Code

MR 유체와 압전 작동기를 이용한 자동차 엔진 마운트의 능동진동제어

Active Vibration Control of Automotive Engine Mount Using MR Fluid and Piezostack

  • 최상민 (인하대학교 대학원 기계공학과) ;
  • 벤큐오 (인하대학교 대학원 기계공학과) ;
  • 최승복 (인하대학교 기계공학부)
  • 발행 : 2008.11.20

초록

This paper presents vibration control of an active hybrid engine mount featuring a magneto-rheological(MR) fluid and a piezostack actuator. The MR fluid is adopted to improve isolation performance at resonant frequencies, while the piezostack actuator is adopted for performance improvement at non-resonant frequencies, especially at high frequencies. Based on some particular practical requirements of engine mounts, the proposed mount is designed and manufactured. The characteristics of rubber element, piezostack actuator and MR fluid are verified for system analysis and controller synthesis. The dynamic model of the proposed mount with a supported mass (engine) is established. In this work, a sliding mode controller is synthesized for the mount system to reduce vibrations transmitted from the engine in a wide frequency range. Computer simulations are performed to evaluate control performances of the proposed active engine mount in time and frequency domains.

키워드

참고문헌

  1. Bernuchon, M., 1984, 'A New Generation of Engine Mounts', SAE, 840259, pp. 230-236
  2. Kim, S. H., Hong, S. R. and Choi, S. B., 2003, 'Vibration Control of Flexible Beam Using Hybrid Mount', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 13, No. 7, pp. 524-531 https://doi.org/10.5050/KSNVN.2003.13.7.524
  3. Kowalczyk, K., Svaricek, F., Bohn C., and Karkosch, H. J., 2004, 'Active Control of Engine Induced Vibrations', International Conference on New Actuators
  4. Choi, S. B. and Hong, S. R., 2004, 'Dynamic Modeling and Vibration Control of Electrorheological Mounts', ASME Journal of Vibration and Acoustics, Vol. 126, No. 4, pp. 537-541 https://doi.org/10.1115/1.1805006
  5. Yook, J. Y., Choi, S. B., Sung, K. G and Moon, S. J., 2007, 'Design of hybrid mount Using Rubber Element and Piezoelectric Actuator with Application to Vibration Control', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 17, No. 5, pp. 390-397 https://doi.org/10.5050/KSNVN.2007.17.5.391
  6. Paeng, Y. S., Yook, J. Y., Choi, S. B. and Moon, S. J., 2007, 'Control Performance of Hybrid Mount Using Electromagnetic Actuator and PZT Actuator', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 17, No. 7, pp. 617-623 https://doi.org/10.5050/KSNVN.2007.17.7.617
  7. Hong, S. R. and Choi, S. B., 2005, 'Vibration Control of a Structural System Using Magnetorheological Fluid Mount', Journal of Intelligent Material System and Structures, Vol. 16, No. 11-12, pp. 931-936 https://doi.org/10.1177/1045389X05053917
  8. Andrew, J. Y. and Colin, H. H., 1996, 'Control of Flexural Vibration in Stiffened Structures Using Multiple Piezoceramic Actuators', Applied Acoustics, Vol. 49, No. 1, pp. 17-48 https://doi.org/10.1016/0003-682X(96)00004-7
  9. Takayoshi, K., Takafumi, F., Takayoshi, H., Takeo, A., Nobuyoshi M., Satoru A. and Kohtaro T., 1997, 'Active Vibration Control of Frame Structures with Smart Structures Using Piezoelectric Actuators (Vibration Control by Control of Bending Moments of Columns)', Smart Materials Structures, Vol. 6, pp. 448-456 https://doi.org/10.1088/0964-1726/6/4/009
  10. Jolly, M. R., Bender, J. W. and Carlson, J. D., 1998, 'Properties and Applications of Commercial Magneto Rheological Fluids', Proceedings of the SPIE's 5th Annual Symposium on Smart structures and Materials, Vol. 3327, pp. 262-275
  11. Lord Corporation, Lord Technical Data, http://www.lordfulfillment.com/upload/DS7015.pdf

피인용 문헌

  1. Active Vibration Control Experiment on Automobile Using Active Vibration Absorber vol.21, pp.8, 2011, https://doi.org/10.5050/KSNVE.2011.21.8.741
  2. An Experimental Investigation on Sound Transmission Loss Performance of Magnetorheological Elastomer with Permanent Magnets vol.28, pp.6, 2018, https://doi.org/10.5050/KSNVE.2018.28.6.642