DOI QR코드

DOI QR Code

Experimental and Numerical Study on the Performance Characteristics of an Open Channel Type Regenerative Pump

개수로형 재생펌프의 성능특성에 관한 실험적 및 수치해석적 연구

  • 신동윤 (과학기술연합대학원대학교 발사체시스템공학) ;
  • 최창호 (한국항공우주연구원 터보펌프그룹) ;
  • 홍순삼 (한국항공우주연구원 터보펌프그룹) ;
  • 김진한 (한국항공우주연구원 터보펌프그룹)
  • Published : 2008.10.01

Abstract

Open channel type regenerative pump has been used in various industrial fields. It generates high pressure with low flow rate. However, it has low efficiency because of its complex flow pattern, We studied performance experiments and 3D numerical flow analysis of a regenerative pump. Through the numerical analysis, we could get the internal flow pattern and profile of a regenerative pump. Also, we examined leakage flow effects due to the gap between casing and impeller and stripper clearance. For the numerical analysis verification, we performed experiments and they had similar tendency at the design point.

Keywords

References

  1. Wilson, W. A., Santalo, M. A. and Oelrich, J. A., 1955, "A Theory of the Fluid-dynamic Mechanism of Regenerative Pumps," Trans. ASME, Vol. 77, pp. 1303-1316
  2. Senoo, Y., 1954, "Researches on the Peripheral Pump," Reports of Research Institute for Applied Mechanics, Kyusku University, Vol. 3, No. 10, pp. 53-113
  3. 이찬, 성형진, 권장혁, 정명균, 1991, "재생펌프의 성능해석 및 최적화에 관한 연구," 대한기계학회논문집, 제15권, 제2호, pp. 661-667
  4. 심창열, 강신형, 2003, "재생펌프의 유동해석 및 누설유동에 관한 연구," 대한기계학회논문집B, 제27권, 제8호, pp. 1015-1022
  5. 이경용, 최영석, 2005, "사이드채널형 재생블로워의 성능평가," 2005 유체기계 연구개발 발표회 논문집, pp. 378-383
  6. 신동윤, 최창호, 김진한, 2006, "개수로형 재생펌프의 특성해석에 관한 연구," 유체기계저널, 제9권, 제6호에 게제예정 https://doi.org/10.5293/KFMA.2007.10.2.046
  7. "FLUENT User's Guide," FLUENT Inc., 1998
  8. Hubel, M., Blattel, B. and Strohl, W., 1995, "Inves- tigation on Fluid Mechanics of the Regenerative Pump Used in Gasoline Injection Systems," SAE Technical paper series, 950077, pp. 131-139
  9. Song, J. W., Raheel, M., Engeda, A., 2003, "A Compressible Flow Theory for Regenerative Compressors with Aerofoil Blades," Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, Vol. 217, No. 11, pp. 1241-1257 https://doi.org/10.1243/095440603771665269