Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

PIV measurement of the flow field in rectangular tunnel

  • Park, Sang-Kyoo (College of Engineering Science, Chonnam National University) ;
  • Yang, Hei-Cheon (College of Engineering Science, Chonnam National University) ;
  • Lee, Yong-Ho (Graduate School, Chonnam National University) ;
  • Chen, Gong (Graduate School, Chonnam National University)
  • Published : 2008.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The development of fluid mechanics is briefly reviewed and the importance of fluid flows to heat and mass transfer in nature as well as to science and engineering is outlined. This paper presents the experimental results of air flow in the rectangular tunnel which has four different exhaust outlets, each distance of which from the inlet is 0, 30, 60 and 90mm respectively. This experiment is conducted by using the olive oil as the tracer particles and the kinematic viscosity of the air flow is $1.51{\times}10^{-5}\;m^2$/s. The flow is tested at the flow rate of 1.3 $m^3$/h and the velocity of 0.3 m/s. PIV technology can be used to make a good description of the smoke flow characteristics in the tunnel.

Keywords

References

  1. Ajay K. Prasad (2000) Particle image velocimetry, Department of Mechanical Engineering, University of Delaware, Newark, DE, 103-116
  2. T.M. Liou, Y.Y. Wu, Y. Chang, (1993) LDV measurements of periodic fully developed main and secondary flows in a channel with rib-disturbed walls, ASME J. Fluids Eng. 115(1) 109-114 https://doi.org/10.1115/1.2910091
  3. Halim, (1988) Detailed velocity measurement of flow through staggered and in-line tube banks in cross-flow using laser Doppler anemometry. Ph.D. thesis, University of Manchester. 23-56
  4. M. Hirota, H. Fujita, H. Yokosawa, (1994) Experimental study on convective heat transfer for turbulent flow in a square duct with a ribbed rough wall (characteristics of mean temperature field), ASME J. Heat Transfer 116 (2) 332-340 https://doi.org/10.1115/1.2911405
  5. M. Raffel, C. Willert, J. Kompenhans, (1998) Particle Image Velocimetry, A Practical Guide, Springer, 88-123
  6. Dantec Dynamics, (2000) FlowManger software and introduction to PIV: 2D PIV Installation and User's Guide, 33-118
  7. R. J. Adrian, (2005) Twenty years of particle image velocimetry, Experiments in Fluids 39: 159-169 https://doi.org/10.1007/s00348-005-0991-7
  8. Grant I. (1997): Particle image velocimetry, A review, Proceedings Institute of Mechanical Engineers, 211, 55-76

Cited by

  1. Flow Field Analysis of Smoke in a Rectangular Tunnel vol.33, pp.5, 2009, https://doi.org/10.5916/jkosme.2009.33.5.679
  2. A Study on Flow Characteristics of Polluted Air in Rectangular Tunnel Models Using a PIV System vol.34, pp.6, 2010, https://doi.org/10.5916/jkosme.2010.34.6.825
  3. Experimental and CFD Simulations of Polluted Air Behavior in Rectangular Tunnels vol.35, pp.5, 2011, https://doi.org/10.5916/jkosme.2011.35.5.608
  4. Flow Behavior in a Rectangular Tunnel Opened and Closed at Both Sides Using CFD vol.36, pp.3, 2012, https://doi.org/10.5916/jkosme.2012.36.3.368
  5. Flow Characteristics of Polluted Air in a Rectangular Tunnel using PIV and CFD vol.36, pp.5, 2012, https://doi.org/10.5916/jkosme.2012.36.5.609
  6. Distribution of CO Concentration in Two Tunnel Models Using CFD vol.36, pp.7, 2012, https://doi.org/10.5916/jkosme.2012.36.7.910