DOI QR코드

DOI QR Code

Modeling of Steam Injection Heater for Fresh Water Generator

조수기용 증기분사 열교환기에 대한 모델링

  • 홍철현 (부산대학교 기계공학부) ;
  • 이억수 (부산대학교 기계공학부)
  • Published : 2008.09.30

Abstract

Steam injection heater is the most widely used method for fresh water generator throughout industry. This method is often chosen because of its simplicity. The steam bubbles condense and give up their heat to the surrounding liquid. Experimental study on steam injection heater has been performed in order to find the effect of major parameter. And conservation equation and Bernoulli obstruction theory are used for numerical simulation model of vapor flow-rate. Qualitative comparisons between simulations and measurements show a good agreement and the simulation models are thereby verified.

Keywords

References

  1. 최순호, 윤석훈, 김창복, 송영호, 전종필, 최두열, '선박 및 해상플랜트용 판형 열교환기의 열전달계수 측정에 관한 연구', 한국마린엔지니어링학회 후기학술대회 논문집, 2006
  2. 문수범, 최현규, 최재혁, 구너형정, 김경근,최순호,' 신형 수이젝트 개발을 위한 실험연구', 한국마린엔지니어링 학회지, 제30권 , 제6호, pp.677-684, 2006
  3. 김병덕, 송치성, 김경근, 김종헌, 김용모, '대형 저압 증발식 조수기 개발', 한국박용기관학회지, 제18권, 제4호, pp. 355-366, 1994
  4. 송치성, 강신돌, 최준섭, '선박용 조수장치', 한국박용기관학회지, 제17권, 제3호, pp.137-147, 1993
  5. Schroyer, J. A., 'Understand the Basics of Steam Injecting Heating', Chemical Engineering progress, May, 1997
  6. Deberne, N., 'A Model for calculation of steam injector performance', Int. J. Multiphase flow, Vol.25, No.5, 1999
  7. Davis, J., Yadigaroglu, G., 'Direct Contact Condensation in Hiemenz flow boundary layers', Int. J. Heat Mass Transfer, Vol.47, pp.1863-1875, 2004 https://doi.org/10.1016/j.ijheatmasstransfer.2003.10.009
  8. 이수관, 배성효, 김무환, '미세노즐을 통해 수직분사된 수증기의 직접접촉응축 영역도', 대한기계학회 추계학술대회논문집, 2004
  9. White, F. M., 'Fluid Mechanics,' Int. Ed., pp. 399-425, 2003