Journal of the Korea Safety Management & Science (대한안전경영과학회지)

Korea Safety Management & Science (대한안전경영과학회)
권호 표지

Reliability prediction of electronic components on PCB using PRISM specification

PRISM 신뢰성 예측규격서를 이용한 전자부품(PCB) 신뢰도 예측

  • Lee, Seung-Woo (Intelligent Manufacturing Systems Research Division, KIMM) ;
  • Lee, Hwa-Ki (Department of Industrial Engineering, INHA University)
  • 이승우 (한국기계연구원 지능형생산시스템연구본부) ;
  • 이화기 (인하대학교 산업공학과)
  • Published : 2008.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The reliability prediction and evaluation for general electronic components are required to guarantee in quality and in efficiency. Although many methodologies for predicting the reliability of electronic components have been developed, their reliability might be subjective according to a particular set of circumstances, and therefore it is not easy to quantify their reliability. In this study reliability prediction of electronic components, that is the interface card, which is used in the CNC(Computerized Numerical Controller) of machine tools, was carried out using PRISM reliability prediction specification. Reliability performances such as MTBF(Mean Time Between Failure), failure rate and reliability were obtained, and the variation of failure rate for electronic components according to temperature change was predicted. The results obtained from this study are useful information to consider a counter plan for weak components before they are used.

Keywords

References

  1. 김원경, "시스템 신뢰도 공학", 교우사, (1999)
  2. 모아소프트, "신뢰성 예측 가이드", 교우사, (2002):12-176
  3. 이수훈, 김종수, 이승우 외, "머시닝센터의 고장모드 해석에 관한 연구", 한국정밀공학회지, 18(6), (2001):74-79
  4. 이치우, 이성우, "응용신뢰성공학", 구민사, (1996)
  5. Black, A.L., "Bellcore system hardware reliability prediction", Proceedings of a Reliability Maintainability Symposium, (1996):247-261
  6. Cassanelli, G., Nura, G., Cesaretti, F., Vanzi, M. and Fantini, F., "Reliability predictions in electronics industrial application", Microelectronics Reliability, 45(9), (2005):1321-1326 https://doi.org/10.1016/j.microrel.2005.07.014
  7. Denson, W., "A tutorial: PRISM", Reliability Analysis Center, (1993):1-6
  8. Foucher, B., Boullie, J., Meslet, B. and Das, D., "A review of reliability prediction methods for electronics devices", Microelectronics Reliability, 42(8), (2002):1155-1162 https://doi.org/10.1016/S0026-2714(02)00087-2
  9. O'Connor, P., Head, M.G. and Joy, M., "Reliability prediction for microelectronics systems", Reliability Engineering, 10(3), (1984): 129-140 https://doi.org/10.1016/0143-8174(85)90016-2
  10. Palo, S., "Reliability prediction of microcircuit", Microelectronics Reliability, 23(2), (1983):283-294 https://doi.org/10.1016/0026-2714(83)90335-9
  11. Pecht, M., Das, D. and Ramakrishnan, A., "The IEEE standards of reliability program and reliability prediction methods for electronics equipment", Microelectronics Reliability, 42(9), (2002): 1259-1266 https://doi.org/10.1016/S0026-2714(02)00132-4
  12. Reliability Analysis Center, "PRISM & Failure Mode/ Mechanical Distribution Document", RAC(USA), (1997)
  13. Valsena, N., "The use of MIL-HDBK-217 with the SCC EEE components", Microelectronics Reliability, 34(4), (1994):711-719 https://doi.org/10.1016/0026-2714(94)90034-5