참고문헌
- 이종섭, 이창호 (2006a), "벤더엘리먼트 시험의 원리와 고려사항", 한국지반공학회 논문집, 제 22권 5호, pp. 47-57
- 이종섭, 이창호 (2006b), "압밀, 토모그래피, 액상화시험에서 벤 더 엘리먼트의 적용", 한국지반공학회 논문집,제22권8호,pp.43-54
- 이창호,이종섭,윤형구,쭝훙꿍,조태현(2006),"응력유도 및 고유 이방성에 따른 전단파 속도 특성", 한국지반공학회논문집, 제 22권, 11호, pp.47-54
- Afifi, S. S. and Woods, R. D. (1971), "Long-term pressure effects on shear modulus of soils", Journal of the Soil Mechanics and Foundations Division, ASCE, 97(10), 1445-1460
- Aki, K. and Richards, P. G. (1980), Quantitative seismology: Theory and Method. W. H. Freeman and Company, 932p
- Anderson, D. G. and Stokoe, K. H. (1978), "Shear Modulus: a time-dependent soil property", Dynamic Geotechnical Testing, ASTM, STP 654, 66-90
- Archie, G. E. (1942), "The electrical resistance log as an aid in determining some reservoir characteristics", Transactions of the American Institute of Mining, Metallurgical, and Petroleum Engineers, 146, 54-62
- ASTM D2435-04 (2004), "Standard Test Method for One- Dimensional Consolidation Properties of Soils Using Incremental Loading", Annual Book of ASTM Standard, Vol. 04.08
- Cho, G. C., Lee, J. S., and Santamarina, J. C. (2004), "Spatial variability in soils: High resolution assessment with electrical needle probe", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 130(8), 843-850 https://doi.org/10.1061/(ASCE)1090-0241(2004)130:8(843)
- Dyvik, R. and Madshus, C. (1985), "Lab measurements of Gmax using bender elements", Proc. ASCE Conference on Advances in the Art of Testing Soils under Cyclic Conditions, 186-196
- Fernandez, A. L. (2000), Tomographic imaging the state of stress. PhD thesis, Civil Engineering, Georgia Institute of Technology, Atlanta
- Hardin, B. O. and Black, W. L. (1968), "Vibration modulus of normally consolidated clay", Journal of the Soil Mechanics and Foundations Division, ASCE, 94(2), 353-369
- Ismail, M. A. and Rammah, K. I. (2006), "A new setup for measuring Go during laboratory compaction", Geotechnical Testing Journal, ASTM, 29(4), 280-288
- Klein, K. and Santamarina, J. C. (2005), "Soft sediments: wavebased characterization", International Journal of Geomechanics, ASCE, 5(2), 147-157 https://doi.org/10.1061/(ASCE)1532-3641(2005)5:2(147)
- Knox, D. P., Stokoe, K. H. II., and Kopperman, S. E. (1982), "Effect of state of stress on velocity of low-amplitude shear waves propagating along principal stress directions in dry sand", Geotechnical Engineering Report GR 82-23, University of Texas at Austin
- Lee, J. S. and Santamarina, J. C. (2005), "Bender elements: performance and signal interpretation", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 131(9), 1063-1070 https://doi.org/10.1061/(ASCE)1090-0241(2005)131:9(1063)
- Lee, J. S. and Santamarina, J. C. (2006), Discussion "Measuring shear wave velocity using bender elements", by Leong, E.C., Yeo, S.H., and Rahardjo, H. Geotechnical Testing Journal, ASTM, 29, 439-441
- Lee, J. S., Fernandez, A. L., and Santamarina, J. C. (2005), "Swave velocity tomography: small-scale laboratory application." Geotechnical Testing Journal, ASTM, 28(4), 336-344
- Marcuson, W. F. and Wahls, H. E. (1972), "Time effects on dynamic shear modulus of clays", Journal of the Soil Mechanics and Foundations Division, ASCE, 98(12), 1359-1373
- Pennington, D. S., Nash, D. F. T., and Lings, M. L. (1997), "Anisotropy of Go shear stiffness in Gault Clay", Geotechnique, 47(3), 391-398 https://doi.org/10.1680/geot.1997.47.3.391
- Roesler, S. K. (1979), "Anisotropic shear modulus due to stress anisotropy", Journal of Geotechnical Engineering Division, ASCE, 105(7), 871-880
- Sanchez-Salinero, I., Roesset, J. M., and Stokoe, K. H. II. (1986), Analytical studies of body wave propagation and attenuation, Report GR-86-15, University of Texas, Austin. 272p
- Santamarina, J. C., Klein, K. A., and Fam, M. A. (2001), Soils and Waves - Particulate Materials Behavior, Characterization and Process Monitoring, John Wiley and Sons, New York
- Viggiani, G. and Atkinson, J. H. (1995), "Interpretation of bender element tests", Geotechnique, 45(1), 149-154 https://doi.org/10.1680/geot.1995.45.1.149
- Yamashita, S. and Suzuki, T. (2001), "Small strain stiffness on anisotropic consolidated state of sands by bender elements and cyclic loading tests", Proc. 15th International Conference of Soil Mechanics and Geotechnical Engineering, Istanbul, 325-328
- Yu, P. and Richart, F. E. Jr., (1984), "Stress ratio effects on shear modulus of dry sands", Journal of Geotechnical Engineering, ASCE, 110 (3), 331-345 https://doi.org/10.1061/(ASCE)0733-9410(1984)110:3(331)
- Zeng, X. and Grolewski, B. (2005), "Measurement of Gmax and estimation of Ko of saturated clay using bender elements in an oedometer", Geotechnical Testing Journal, ASTM, 28(3), 264- 274