Advanced Composite Materials

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Fabrication of Metal Nanohoneycomb Structures and Their Tribological Behavior

  • Kim, Sung-Han (Department of Mechanical Engineering, Pohang University of Science and Technology) ;
  • Lee, Sang-Min (Department of Mechanical Engineering, Pohang University of Science and Technology) ;
  • Choi, Duk-Hyun (Department of Mechanical Engineering, Pohang University of Science and Technology) ;
  • Lee, Kun-Hong (Department of Chemical Engineering, Pohang University of Science and Technology) ;
  • Park, Hyun-Chul (Department of Mechanical Engineering, Pohang University of Science and Technology) ;
  • Hwang, Woon-Bong (Department of Mechanical Engineering, Pohang University of Science and Technology)
  • Published : 2008.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Metal nanohoneycomb structures were fabricated by E-beam evaporation and a two-step anodization process in phosphoric acid. Their tribological properties of adhesion and friction were investigated by AFM in relation to the pore size of the nanohoneycomb structures. Variations of the adhesive force are not found with pore size, but formation of the pore greatly reduces the adhesive force compared to the absence of pore structure. The coefficient of friction increased nonlinearly with pore size, due to surface undulation around the pore. Tribological properties do not differ greatly between the original nanohoneycomb structure and the metal nanohoneycomb structure.

Keywords

References

  1. K. Holmberg, Reliability aspects of tribology, Tribology 34, 801-808 (2001) https://doi.org/10.1016/S0301-679X(01)00078-0
  2. B. Bhushan and S. Sundararajan, Micro/nanoscale friction and wear mechanisms of thin films using atomic force and friction force microscopy, Acta. Mater. 46, 3793-3804 (1998) https://doi.org/10.1016/S1359-6454(98)00062-7
  3. R. W. Carpick, D. F. Olgetree and M. Salmeron, A general equation for fitting contact area and friction vs load measurements, J. Colloid. Interf. Sci. 211, 395-400 (1999) https://doi.org/10.1006/jcis.1998.6027
  4. Y. Sugawara, M. Ohta, T. Konishi, S. Morita, M. Suzuki and Y. Enomoto, Effects of humidity and tip radius on the adhesive force measured with atomic force microscopy, Wear 168, 13-16 (1993) https://doi.org/10.1016/0043-1648(93)90191-N
  5. N. Masashi, O. Satoshi, T. Toshiaki, Y. Kenshi and M. Hideki, GaAs and InP nanohole arrays fabricated by reactive beam etching using highly ordered alumina membranes, Japan. J. Appl. Phys. 38, 1052-1055 (1999) https://doi.org/10.1143/JJAP.38.1052
  6. H. Masuda, M. Watanabe, K. Yasui, D. Tryk, T. Rao and A. Fujishima, Fabrication of a nanostructured diamond honeycomb film, Adv. Mater. 6, 444-447 (2000)
  7. K. Masuda and P. Fukuda, Ordered metal nanohole arrays made by a two-step replication of honeycomb structure of anodic alumina, Science 268, 1466-1468 (1995) https://doi.org/10.1126/science.268.5216.1466
  8. D. Crouse and Y. H. Lo, Self-ordered pore structure of anodized aluminum on silicon and pattern transfer, Appl. Phys. Lett. 76, 49-51 (2000) https://doi.org/10.1063/1.125652
  9. G. Che, B. B. Lakshmi, E. R. Fisher and C. R. Martin, Carbon nanotubule membranes for electrochemical energy storage and production, Nature 393, 346 (1998) https://doi.org/10.1038/30694
  10. Z. B. Zhang, D. Gekhtman, M. S. Dresselhaus and J. Y. Ying, Processing and characterization of single-crystalline ultrafine bismuth nanowires, Chem Mater. 11, 1659 (1999) https://doi.org/10.1021/cm9811545