참고문헌
- M. J. Robinson, Composite cryogenic propellant tank development, AIAA Paper 94-1375-CP (1994)
- T. Aoki, T. Ishikawa, H. Kumazawa and Y.Morino, Mechanical performance of CF/polymer composite laminates under cryogenic conditions, AIAA Paper 2000-1605 (2000)
- H. Kumazawa, T. Aoki and I. Susuki, Analysis and experiment of gas leakage through cross-ply laminates for propellant tanks, AIAA J. 41, 2037-2044 (2003) https://doi.org/10.2514/2.1895
- H. Suemasu, Y. Maeda and F. Namiki, Fracture mechanical study on initiation and growth of debonding between liner and FW layer of cryogenic composite material tank for rocket system, in: Proc. 47th JSASS/JSME Struct. Conf., JSASS, Kanazawa, Japan, pp. 60-62 (2005)
- J. He, T. Aoki and T. Shimoda, Cryogenic mode-II fracture behaviors of film adhesive in CFRP and aluminum bond joints, in: Proc. 46th JSASS/JSME Struct. Conf., JSASS, Hachinohe, Japan, pp. 158-160 (2004)
- J. He and T. Shimoda, Temperature-dependent fracture behavior of CFRP-film adhesive bond joints, in: Proc. 29th JSCM Sympos. Compos. Mater., JSCM, Naha, Japan, pp. 163-164 (2004)
- ASTM D3433-99, Standard test method for fracture strength in cleavage of adhesives in bonded metal joints, Annual Book of ASTM Standards. ASTM Philadelphia, USA (2005)
- B. Blackman and A. Kinloch, Fracture tests on structural adhesive joints, in: Fracture Mechanics Testing Methods for Polymers Adhesives and Composites, D. R. Moore, A. Pavan and J. G. Williams (Eds), pp. 225-267. Elsevier, Amsterdam, The Netherlands (2001)
- J. Jiao, C. K. Gurumurthy, E. J. Kramer, Y. Sha, C. Y. Hui and P. Borgesen, Measurement of interfacial fracture toughness under combined mechanical and thermal stresses, J. Electron. Packag. 120, 349-353 (1998) https://doi.org/10.1115/1.2792645
- J. A. Nairn, Energy release rate analysis for adhesive and laminate double cantilever beam specimens emphasizing the effect of residual stresses, Intl. J. Adhes. Adhes. 20, 59-70 (2000) https://doi.org/10.1016/S0143-7496(99)00016-0
- J. A. Nairn, Fracture mechanics of composites with residual thermal stresses, J. Appl. Mech. 64, 804-810 (1997) https://doi.org/10.1115/1.2788985
- J. G. Williams, End corrections for orthotropic DCB specimens, Compos. Sci. Technol. 35, 367-376 (1989) https://doi.org/10.1016/0266-3538(89)90058-4
- R. Maruyama, T. Yokozeki, T. Ogasawara, T. Ishikawa and T. Ogawa, Study on the applicability of SiC-FRP to cryogenic tank structures with Al liner, in: Proc. 2006 Ann. Mtg JSCM, JSCM, Tokyo, Japan, pp. 137-138 (2006)