참고문헌
- H. K. Lee and L. R. Hausmann, Structural repair and strengthening of damaged RC beams with sprayed FRP, Compos. Struct. 63, 201-209 (2004) https://doi.org/10.1016/S0263-8223(03)00156-9
- O. Hang-Elsafi, S. Alampalli and J. Kunin, Application of FRP laminates for strengthening of a reinforced concrete T-beam bridge structure, Compos. Struct. 52, 453-466 (2001) https://doi.org/10.1016/S0263-8223(01)00035-6
- M. N. S. Hadi, Retrofitting of shear failed reinforced concrete beams, Compos. Struct. 62, 1-6 (2003) https://doi.org/10.1016/S0263-8223(03)00078-3
- O. Rabinoitch and Y. Frostig, Experimental and analytical comparison of RC beams strengthened with CFRP composites, Composites, Part B: Engng 34, 663-677 (2003) https://doi.org/10.1016/S1359-8368(03)00090-8
- M. J. Chajes, W. W. Finch, Jr., T. F. Januszka and T. A. Thomson, Jr., Bond and force transfer of composite materials plates bonded to concrete, ACI Struct. J. 93, 208-217 (1996)
- H. Yoshizawa, T. Myojo, M. Okoshi, M. Mizukoshi and H. S. Kliger, Effect of sheet bonding condition on concrete members having externally bonded carbon fiber sheet, in: 4th Mater. Engng Conf., ASCE Annual Convention, Washington, DC, USA (1996)
- T. Horiguchi and N. Saeki, Effect of test methods and quality of concrete on bond strength of CFRP sheet, Non-Metallic (FRP) Reinforcement for Concrete Structures, vol. 1, pp. 265-270. Japan Concrete Institute, Japan (1997)
- K. Brosens and D. Van Gemert, Anchoring stresses between concrete and carbon fiber reinforced laminates, Non-Metallic (FRP) Reinforcement for Concrete Structures, vol. 1, pp. 271-278. Japan Concrete Institute, Japan (1997)
- T. Maeda, Y. Asano, Y. Sato, T. Ueda and Y. Kakuta, A study on bond mechanism of carbon fiber sheet, Non-Metallic (FRP) Reinforcement for Concrete Structures, vol. 1, pp. 179-286. Japan Concrete Institute, Japan (1997)
- M. Xie and V. M. Karbhari, Peel test for characterization of polymer composite/concrete interface, J. Compos. Mater. 18, 1806-1818 (1997)
- B. Taljsten, Plate bonding: strengthening of existing concrete structures with epoxy bonded plates of steel or fiber reinforced plastics, Doctoral Thesis, Lulea University of Technology, Sweden (1994).
- B. Taljsten, Defining anchor lengths of steel and CFRP plates bonded to concrete, Intl. J. Adhes. Adhes. 17, 319-327 (1997) https://doi.org/10.1016/S0143-7496(97)00018-3
- L. Bizindavyi and K.W. Neale, Transfer lengths and strengths for composites bonded to concrete, J. Compos. Construct., ASCE 3, 153-160 (1999) https://doi.org/10.1061/(ASCE)1090-0268(1999)3:4(153)
- V. A. Volnyy and C. P. Pantelides, Bond length of CFRP composites attached to precast concrete walls, J. Compos. Construct. ASCE 3, 168-176 (1999) https://doi.org/10.1061/(ASCE)1090-0268(1999)3:4(168)
- A. Nanni, D. Lorenzis and B. Miller, Bond of FRP laminates to concrete, ACI Mater. J. 98, 256-264 (2001)
- J. F. Chen and J. G. Teng, Anchorage strength models for FRP and steel plates attached to concrete, J. Struct. Engng, ASCE 127, 784-791 (2001) https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(784)
- Z. S. Wu, H. Yuan and H. D. Niu, Stress transfer and fracture propagation in different kinds of adhesive joints, J. Engng Mech., ASCE 128, 562-573 (2002) https://doi.org/10.1061/(ASCE)0733-9399(2002)128:5(562)
- V. Karbhari,M. Engineer and D. A. Eckel II, On the durability of composite rehabilitation schemes for concrete: use of a peel test, J. Mater. Sci. 32, 147-156 (1997) https://doi.org/10.1023/A:1018591619404
- M. Blaschko, R. Niedermeier and K. Zilch, Bond failure modes of flexural members strengthened with FRP, in: Proc. 2nd Intl Conf. Compos. Infrastruct. (ICCI 1998), H. Saadatmanesh and M. R. Ehsani (Eds), Tucson, Arizona, USA, pp. 315-327 (1998)
- H. Toujanji and G. Ortiz, The effect of surface preparation on the bond strength of concrete, Compos. Struct. 53, 457-462 (2001) https://doi.org/10.1016/S0263-8223(01)00057-5
- J. G. Teng, J. F. Chen, S. T. Smith and L. Lam, FRP Strengthened RC Structures, 1st edn, pp. 11-27. J. Wiley and Sons, Chichester, UK (2002)
- W. D. Brouwer, D. C. F. C. Van Herpet and M. Labordus, Vacuum injection moulding for large structural applications, Composites Part A: Appl. Sci. Manufact. 34, 551-558 (2003) https://doi.org/10.1016/S1359-835X(03)00060-5
- O. Buyukoztur and B. Hearing, Failure behavior of precracked concrete beams retrofitted with FRP, J. Compos. Construct., ASCE 2, 138-144 (1998) https://doi.org/10.1061/(ASCE)1090-0268(1998)2:3(138)
- J. C. Serrano-Perez, Implementation of vacuum assisted resin transfer molding (VARTM) technology in the repair of reinforced concrete structures, Master of Science Thesis, University of Alabama at Birmingham, USA (2003)
- Sika, Construction Products Catalog C160, Sika Corporation, USA (2002)
- J. G. Dai and T. Ueda, Local bond stress slip relations for FRP sheets - concrete interfaces, FRPRCS-6. Singapore (2003)