International Journal of Air-Conditioning and Refrigeration

  • 제15권3호
  • /
  • Pages.122-128
  • /
  • 2007
  • /
  • 2010-1325(pISSN)
  • /
  • 2010-1333(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지

Characteristics of Heat Transfer in the Channel with Twisted Tape

  • Ahn, Soo-Whan (School of Mechanical & Aerospace Engineering, Institute of Marine Industry, Gyeongsang National University) ;
  • Kang, Ho-Keun (School of Mechanical & Aerospace Engineering, Institute of Marine Industry, Gyeongsang National University)
  • 발행 : 2007.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Heat transfer distributions and friction factors in square channels (3.0 ${\times}$ 3.0 cm) with twisted tape inserts and with twisted tape inserts plus interrupted ribs are respectively investigated. The rib height-to-channel hydraulic diameter ratio, $e/D_h$, is kept at 0.067 and test section length-to-hydraulic diameter ratio, $L/D_h$ is 30. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. The twisted tape is 0.1 mm thick carbon steel sheet with diameter of 2.8 cm, length of 90 cm, and 2.5 turns. Two heating conditions are investigated for test channels with twisted tape inserts and rib turbulators: (1) electric heat uniformly applied to four side walls of the square duct, and (2) electric heat uniformly applied to two opposite ribbed walls of the square channel. Results show that the twisted tape with interrupted ribs provides a higher overall heat transfer performance over the twisted tape with no ribs.

키워드

참고문헌

  1. Webb, R. L., Eckert, E. R. G., and Goldstein, R. J., 1971, Heat transfer and friction in tubes with repeated-rib roughness, Int. J. of Heat and Mass Transfer, Vol. 14, pp. 601-617 https://doi.org/10.1016/0017-9310(71)90009-3
  2. Gee, D. L. and Webb, R. L., 1980, Forced convective heat transfer in helically rib-roughened tubes, Int. J. of Heat and Mass Transfer, Vol. 23, pp. 1127-1136 https://doi.org/10.1016/0017-9310(80)90177-5
  3. Han, C. J., 1988, Heat transfer and friction characteristics in rectangular channels with rib turbulators, ASME J. of Heat Transfer, Vol. 110, pp.321-328 https://doi.org/10.1115/1.3250487
  4. Han, C. J. and Zhang, Y. M., 1992, High Performance heat transfer ducts with parallel broken and V -shaped broken ribs, Int. J. of Heat and Mass Transfer, Vol. 35, pp. 513-523 https://doi.org/10.1016/0017-9310(92)90286-2
  5. Ahn, S. W., Kang, H. K., Bae, S. T., and Lee, D. H., 2008, Heat transfer and friction factor in a square channel with one, two, or four ribbed walls, ASME J. of Turbo-machinery, Vol. 129, in press
  6. Zhang, Y. M., Han, C.J., and Lee, C. P., 1997, Enhanced heat transfer and friction characteristics of turbulent flow in circular tubes with twisted tape inserts and axial interrupted ribs, Enhanced Heat Transfer, Vol. 4, pp.297-308 https://doi.org/10.1615/JEnhHeatTransf.v4.i4.50
  7. Dittus, F. W. and Boelter, L. M. K., 1930, University of California (Berkeley) Pub. Eng. Vol. 2, pp. 443-452
  8. Kline, S. J. and McClintock, F. A., 1953, Describing uncertainties in single sample experiments, Mechanical Engineering, Vol. 75, pp.3-8
  9. Zhang, Y. M., Azad, G. M., Han, C. J., and Lee, C. P., 2000, Turbulent heat transfer enhancement and surface heating effect in square channel with wavy, and twisted tape inserts with interrupted ribs, Enhanced Heat Transfer, Vol. 7, pp. 35-49 https://doi.org/10.1615/JEnhHeatTransf.v7.i1.40