초록
본 연구는 대단층이 발달하는 화산암 분포지역에서 암반 절취사면을 대상으로 단열의 발달특성과 이에 따른 암반분류 수정안을 제시하고자 수행되었다. 부산-울산 고속도로 건설 현장 중 해운대-기장 사이의 일광단층에 가까운 도로 절취사면 노두에서 단열계의 특성이 조사 분석되었다. 단열간격 분포의 경우 신장단열은 대수정규 분포를 보여주고 전단단열은 음의 지수 분포를 보여준다. 단열길이 누적빈도 분포 그림에서 중앙의 직선 구간이 1지점 -1.13, 2지점 -1.01, 3지점 -1.52의 지수를 가지며 멱법칙 스케일링을 지시한다. 각 지점에서 단열의 간격 및 밀도, 단열 간 교차점의 수 등을 분석하여 판단해 볼 때 암반의 안정성 및 강도는 1지점이 가장 낮고 2지점이 가장 높다. 한편, 각 지점에서 서로 연결된 단열의 최대 클러스터로 평가할 때 유체 이동의 능률은 3지점이 가장 높고 1지점이 가장 낮다. 이는 3지점이 상대적으로 단열의 길이가 긴 것들이 많으며 이들이 서로 연결하여 형성하는 최대 클러스터가 높은 비율로 전 지역에 고루 분포하고 있기 때문으로 볼 수 있다. 한편, 현장조사 자료를 토대로 응용통계기법을 이용하여 RMR 분류의 항목별 배점을 조정한 결과에 의하면, 대단층이 발달하는 화산암에서는 기존 RMR 분류 항목별 배점에 비해 현저히 다른 수정된 RMR 배점을 설정함이 타당한 것으로 나타났다. 분석결과 무결암 강도는 18, RQD는 61, 불연속면 간격 2, 불연속면 조건 2, 그리고 지하수 17의 배점이 나타났다.
The properties of fracture system on road-cut slopes along the Busan-Ulsan express way under construction are investigated and analyzed. Fracture spacing distributions show log-normal form with extension fractures and negative exponential form with shear fractures. Straight line segments in log-log plots of cumulative fracture length indicate a power-law scaling with exponents of -1.13 in site 1, -1.01 in site 2 and -1.52 in site 3. It is likely that the stability and strength of rock mass are the lowest in site 1 as judged from the analyses of spacing, density and inter-section of fractures in three sites. In contrast, the highest efficiency of the fracture network for conducting fluid flow is seen in site 3 where the largest cluster occupies 73% through the window map. Based on the field survey data, this study modified weighting values of the RMR system using a multiple regression analysis method. The analysis result suggests a modified weighting values of the RMR parameters as follows; 18 for the intact strength of rock; 61 for RQD; 2 for spacing of discontinuities; 2 for the condition of discontinuities; and 17 for ground water.