참고문헌
- Doebling, S. W., Farrar, C. R., and Prime, M. B., 1998, 'A Summary Review of Vibration-based Damage Identification Methods', Shock and Vibration Digest, Vol. 30, pp.91-105 https://doi.org/10.1177/058310249803000201
- Meyendorf, N. and Berthold, A, 2006, 'New Trends in NDE and Health Monitoring', Proceedings of SPIE : Smart Structures and Materials/NDE for Health Monitoring and Diagnostics, Vol. 6179, pp. 617901-1-617901-10
- Irwin, G. R., 1957, 'Analysis of Stresses and Strains Near the End of a Crack Traversing a Plate', ASME Journal of Applied Mechanics, Vol. 24, pp.361-364
- Chondros, T. G. and Dimarogonas, A D., 1980, 'Identification of Cracks in Welded Joints of Complex Structures', Journal of Sound and Vibration, Vol. 69, pp.531-538 https://doi.org/10.1016/0022-460X(80)90623-9
- Dimarogonas, A D. and Massouros, G., 1981, 'Torsional Vibration of a Shaft with Circumferential Crack', Engineering Fracture Mechanics, Vol. 15, pp. 439-444 https://doi.org/10.1016/0013-7944(81)90069-2
- Dimarogonas, A D. and Papadopoulos, C. A, 1983, 'Vibration of Cracked Shafts in Bending', Journal of Sound and Vibration, Vol. 91, pp, 583-593 https://doi.org/10.1016/0022-460X(83)90834-9
- Gudmundson, P., 1983, 'The Dynamic Behaviour of Slender Structures with Crosssectional Cracks', J. Mech. Physics Solids, Vol. 31, pp. 329-345 https://doi.org/10.1016/0022-5096(83)90003-0
- Christides, S. and Barr, A D. S., 1984, 'One-dimensional Theory of Cracked BernoulliEuler Beams', International Journal Mechanics Science, Vol. 26, pp.639-648 https://doi.org/10.1016/0020-7403(84)90017-1
- Shen, M. H. and Pierre, C., 1994, 'Free Vibrations of Beams with a Single-edge Crack', Journal of Sound and Vibration, Vol. 170, pp.237-259 https://doi.org/10.1006/jsvi.1994.1058
- Chondros, T. G. and Dimarogonas, A D., 1998, 'Vibration of a Cracked Cantilever Beam', Journal of Vibration and Acoustics, Vol. 120, pp. 742-746 https://doi.org/10.1115/1.2893892
- Chondros, T. G. and Dimarogonas, A. D., 1998, 'A Continuous Cracked Beam Vibration Theory', Journal of Sound and Vibration, Vol. 215, pp.17-34 https://doi.org/10.1006/jsvi.1998.1640
- Ha, T. W. and Song, O. S., 1999, 'A Study on the Dynamic Characteristics of a Composite Beam with a Transverse Open Crack', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 9, No.5, pp. 1019-1028
- Hong, S. W., Choi, S. H. and Lee, C. W., 2003, 'Dynamic Modeling and Analysis of General Rotor Systems with Open Cracks', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 13, No.4, pp.290-299 https://doi.org/10.5050/KSNVN.2003.13.4.290
- Yoon, H, I. and Son, I. S., 2004, 'A Study on Dynamic Behavior of Cantilever Pipe Coveying Fluid with Crack and Moving Mass(1) - Focused on the Amplitude Characteristics-', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 14, No. 12, pp. 1304-1313 https://doi.org/10.5050/KSNVN.2004.14.12.1304
- Yang, X. F., Swamidas, A. S. J. and Seshadri, R, 2001, 'Crack Identification in Vibrating Beams Using the Energy Method', Journal of Sound and Vibration, Vol. 244, pp.339-357 https://doi.org/10.1006/jsvi.2000.3498
- Owolabi, G. M., Swamidas, A. S. J. and Seshadri, R, 2003, 'Crack Detection in Beams Using Changes in Frequencies and Amplitudes of Frequency Response Functions', Journal of Sound and Vibration, Vol. 265, pp.1-22 https://doi.org/10.1016/S0022-460X(02)01264-6
- Gdoutos, E. E., 1993, Fracture Mechanics, Dordrecht : Kluwer Academic Publishers
- Gorman, D. J., 1975, Free Vibration Analysis of Beams and Shafts, John Wiley and Sons, Inc
피인용 문헌
- Multi-crack Detection of Beam Using the Change of Dynamic Characteristics vol.25, pp.11, 2015, https://doi.org/10.5050/KSNVE.2015.25.11.731
- Fault Detection Method of Pipe-type Cantilever Beam with a Tip Mass vol.25, pp.11, 2015, https://doi.org/10.5050/KSNVE.2015.25.11.764
- Dynamic Analysis of Cracked Timoshenko Beams Using the Transfer Matrix Method vol.26, pp.2, 2016, https://doi.org/10.5050/KSNVE.2016.26.2.179
- Feasibility Study on Neck Defect Inspection Technique for Press-formed Products by Using Structural Vibration Measurement vol.28, pp.6, 2018, https://doi.org/10.5050/KSNVE.2018.28.6.721