초록
플라스틱은 아주 유용한 물질로서 우리 일상생활에 폭넓게 이용되고 있다. 국내에서는 약 400 만톤의 폐플라스틱이 발생되고 있지만 재활용율은 30% 이하로 대부분 소각이나 매립에 의해 처리되고 있다. 따라서 폐플라스틱을 재활용할 수 있는 재질분리 기술개발 필요한 실정이다. 본 연구에서는 폐플라스틱 종말품으로부터 PET 회수를 위한 마찰하전 정전선별이 수행되었다. 하전특성 연구결과에 의하면, PET와 PVC의 하전극성과 하전량은 HDPE와 PP의 하전물질 그리고 상대습도가 낮을수록 효과적이었다. HDPE 싸이클론 하전장치를 이용한 재질분리 실험결과, PET의 품위와 회수율은 전극전압 30 kV 이상, 분리대위치 -2cm의 조건에서 각각 96.8%와 85.0%로 얻어졌으며, 분리대의 위치(-6cm)에 따라 PET 회수율이 24% 감소하지만 품위를 98.5%까지 분리할 수 있는 기술을 개발하였다.
Plastics are widely used in everyday life as very useful material. In Korea, about 4 million tons of plastic wastes are generated annually. However, recycling ratio is below 30%, and most of plastic wastes are disposed by landfill and incineration. Hence, the development of material separation technique that can recycle plastic wastes is a necessary situation. In this study, Triboelectrostatic separation for recovery of PET from final plastic wastes obtained from the sink product after wet-type gravity separation has been carried out. In the charging properties, the charge polarity and charge density of PET and PVC were very effective with the tirbo-charger made of PP and HDPE with the decrease in relative humidity. In material separation using HDPE cyclone charger, a PET grade of 96.80% and a recovery of 85.0% were achieved at 30 kV and the splitter position -2cm from the center. In order to obtain PET grade of 98.5%, PET recovery should be sacrificed by 24% with moving the splitter from the center to -6cm position.