한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제24권11호
  • /
  • Pages.101-107
  • /
  • 2007
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

1 차원 Lumped 모델을 이용한 산업용 잉크젯 프린팅 헤드 토출 특성 해석

Performance Analysis of the Industrial Inkjet Printing Head Using 1D Lumped Model

  • 심원철 (삼성전기 중앙연구소 eMD Center) ;
  • 김영재 (삼성전기 중앙연구소 eMD Center) ;
  • 박창성 (삼성전기 중앙연구소 eMD Center) ;
  • 유영석 (삼성전기 중앙연구소 eMD Center) ;
  • 정재우 (삼성전기 중앙연구소 eMD Center) ;
  • 오용수 (삼성전기 중앙연구소 eMD Center) ;
  • 박성준 (삼성전기 중앙연구소 eMD Center)
  • 발행 : 2007.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Jettability analysis using one-dimensional(1D) lumped parameter model has been investigated to design the industrial inkjet head with proper drop velocity and drop volume. By simplifying the inkjet head system into an equivalent electrical circuit, lumped model has been developed. Performance of the lumped model is verified by the comparison between measured results of droplet velocity and ejection volume and predicted value. Also, the jetting performance of an inkjet head is characterized by varying the design parameter and driving condition. As a result, simulation results shows good agreement with the experimentally measured value. The developed lumped model enables to easily understand the effect of dimension change and predict the jetting performance.

키워드

참고문헌

  1. Peter, E., 'Inkjet Printing in the Electronics Industry,' DDP2001: Eye on the Future, Vol. 1, pp. 197-200, 2001
  2. Stephen, F., 'Inkjet Technology and Product Development Strategies,' Torrey Pines Research, pp. 198-201, 2000
  3. Liou, T., Shih, K., Chau, S. and Chen, S., 'Three-dimensional simulations of the Droplet Formation during the Inkjet Printing Process,' International Communications in Heat and Mass Transfer., Vol. 29, No.8, pp.1109-1118, 2002 https://doi.org/10.1016/S0735-1933(02)00439-6
  4. Kyser, E., Collins, F. and Herbert, H., 'Design of an Impulse Ink Jet,' Journal of Applied Photographic Engineering, Vol. 7, No.3, pp. 73-79, 1981
  5. Kyser, E. and Sears, B., 'Method and apparatus for recording with writing fluids and drop projection means therefore,' U.S. Patent 3,946,398, 1976
  6. Sim, W., Park, S., Park, C., Yoo, Y., Kim, Y., Joung, J., and Oh, Y., 'Analysis of the Micro Droplet Ejection for the Application of Industrial Inkjet Printing Head,' Technical Proceedings of the NSTI Nanotechnology Conference and Trade Show, Vol. 2, pp. 528-533, 2006