Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

The Characteristics of Cutting Force and Surface Roughness According to Tool Tilting Angle in 5-axis High Speed Machining of Molds

금형의 5축 고속가공에서 공구 틸팅각에 따른 절삭력에 표면거칠기 특성

  • 강익수 (부산대학교 정밀정형 및 금형가공연구소) ;
  • 김정석 (부산대학교 기계공학부/정밀정형 및 금형가공연구소) ;
  • 김석원 (테크맥(주)) ;
  • 이기용 (한국생산기술연구원)
  • Published : 2007.10.15
Download PDF
⟨ Previous Next ⟩

Abstract

The high speed machining has been widely applied to manufacture dies and machine elements in industrial field. Especially, 5-axis milling has been employed to produce a wide range of turbine blades, impellers and complex molds. In this study, the machining characteristics of injection molds were investigated according to tool tilting angles in 5-axis milling. The cutting force and surface roughness were investigated with various tool tilting angles. When the tool tilting angle was over than 10 degree, the characteristics of cutting force and surface roughness were improved in machining of Al alloy.

Keywords

References

  1. Shulz, H. and Hock, S., 1995, 'High Speed Milling of Dies and Moulds-Cutting Conditions andTechnology,' Annals of CIRP, Vol. 44, pp. 35-38 https://doi.org/10.1016/S0007-8506(07)62270-7
  2. Urbanski, J. P., Koshy, P., Dewes, R. C. and Aspinwall, D. K., 2000, 'High Speed Machining of Moulds and Dies for Net Shape Manufacture,' Materials & Design, Vol. 21, pp. 395-402 https://doi.org/10.1016/S0261-3069(99)00092-8
  3. Lim, T. S., Lee, C. M., Kim, S. W. and Lee, D. W., 2002, 'Evaluation of Cutter Orientations in 5-axis High Speed Milling of Turbine Blade,' Journal of Materials Process Technology, Vol. 130-131, pp. 401-406
  4. Cho, H. D., Jung, D. I., Yoon, M. C., Choi, D. S., Shin, B. S., Lee, E. S. and Dong, Y. G., 2002, 'The Development of Exclusive CAD/CAM System for Impeller Blades Formed by Ruled Surface II(A Study on the 5-Axis Machining),' Transaction of the KSMTE, Vol. 11. No. 3, pp. 1-8
  5. Cho, H. D. and Park, Y. W., 2002, 'A Study on the Geometric Definition and 5-Axis Machining of End Mill with Insert Tip,' Transaction of the KSMTE, Vol. 11. No. 6, pp. 1-9