전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers)

  • 제56권10호
  • /
  • Pages.1709-1714
  • /
  • 2007
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

히스테리시스 특성을 고려한 측정용 변류기 2차 전류 보상 알고리즘

Compensating Algorithm for the Secondary Current of a Measurement CT Considering the Hysteresis Characteristics of the Core

  • 발행 : 2007.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper proposes a compensating algorithm for the secondary current of the measurement current transformer (CT) that removes the effects of the hysteresis characteristics of the iron-core. The exciting current resulting from the hysteresis characteristics of the core causes an error between the primary current and the secondary current of the measurement CT. The exciting current can be decomposed into the magnetizing current and the core loss current. The core loss current is obtained from the measured secondary current and the core loss resistance. The core flux linkage is calculated by integrating the measured secondary current, and then inserted into the flux-magnetizing current curve to obtain the magnetizing current. The exciting current at every sampling interval is obtained by summing the core-loss and magnetizing currents and then added to the measured current to obtain the correct current. The performance of the proposed algorithm is validated under various conditions using EMTP generated data. The results indicate that the proposed algorithm can improve the accuracy of the measurement CT significantly, and thus reduce the size and the cost of the measurement CT.

키워드

참고문헌

  1. S. H. Horowitz, and A. G. Phadke, 'Power system Relaying,' Research Studies Press Ltd, 1992
  2. IEEE C37.1101996, 'IEEE guide for the application of current transformer used for protective relaying purposes,' IEEE Std., December 1996
  3. D. A. Ward, and J. La T. Exon, 'Using Rogowski coils for transient current measurements,' lEE Engineering Science and Education Journal, Vol. 2, No.3, pp. 105-113, June 1993 https://doi.org/10.1049/esej:19930034
  4. K. E. Nalty, R. C. Zowarka, and L. D. Holland, 'Instrumentation for EM launcher systems,'IEEE Trans. Magnetics, Vol. 20, No.2, pp. 328-331, March 1984 https://doi.org/10.1109/TMAG.1984.1063101
  5. Emerging Technology Working Group and Fiber Optic Sensors Working Group, 'Optical current transducers for power systems: A Review,' IEEE Trans. Power Delivery, Vol. 9, No.4, pp. 1778-1788, October 1994 https://doi.org/10.1109/61.329511
  6. Y. Hasegawa, Y. Ichikawa, H. Kastsukawa, N. Tanaka, and Y. Sakurai, 'Development of a new type of optical transducer for measuring fault current,' IEEE Trans. Power Delivery, Vol. 9, No. 3, pp. 1245-1252, July 1994 https://doi.org/10.1109/61.311150
  7. D. Slomovitz, 'Electronic system for increasing the accuracy of in-service instrument-current transformers,' IEEE Trans. Instrumentation and measurement, Vol. 52, No.2, pp. 408-410, April 2003 https://doi.org/10.1109/TIM.2003.810718
  8. N. Locci, and C. Muscas, 'A digital compensation method for improving current transformer accuracy,' IEEE Trans. Power Delivery, Vol. 15, No.4, pp. 1104-1109, October 2000 https://doi.org/10.1109/61.891489
  9. N. Locci, and C. Muscas, 'Hysteresis and eddy currents compensation in current transformer,' IEEE Trans. Power Delivery, Vol. 16, No.2, pp. 154-159, April 2001 https://doi.org/10.1109/61.915475
  10. Y. C. Kang, J. K. Park, S. H. Kang, A. T. Johns, and R. K. Aggarwal, 'An algorithm for compensating secondary currents of current transformers,' IEEE Trans. Power Delivery, Vol. 12. No.1, pp. 116-124, January 1997 https://doi.org/10.1109/61.568231
  11. M. Kezunovic, Lj. Kojovic, A. Abur, C. W. Fromen, D. R. Sevcik, and F. Phillips, 'Experimental evaluation of EMTP-based current transformer models for protective relay transient study,' IEEE Trans. Power Delivery, Vol. 9, No.1, pp. 405-413, January 1994 https://doi.org/10.1109/61.277712
  12. International standard IEC 60044-8, 'Instrument transformers - part 8: Electronic current transformers,' IEC Std., July 2002