References
- Tuckerman, D. B., Pease, R. F. W., 1981, 'High-Performance Heat Sinking for VLSI,' IEEE Electron Device Lett. EDL-2, pp. 126-129
- Tuckerman, D. B., 1984, 'Heat Transfer Microstructures for Integrated Circuits,' Ph. D. Thesis, Stanford University
- Samalam, V. K., 1989, 'Convective Heat Transfer In Microchannels,' J. Electron Mater. 18, pp. 611-617 https://doi.org/10.1007/BF02657475
- Kawano, K., Minakami, K., Iwasaki, H. and Ishizuka, M. 1998, 'Application of Heat Transfer in Equipment Systems, and Education,' in: Development of Microchannels Heat Exchanging, R.A. Nelson Jr., Swanson, L.W., M. Bianchi, V.A. and Camci, C. Eds., New York, ASME, HTD-361-3/PID-3, pp. 173-180
- Rahman, M. And Gui, M. F., 1993, 'Experimental Measurements Of Fluid Flow and Heat Transfer in Microchannel Cooling Passages in A Chip Substrate,' Adv. Electron. Packag., ASME EEP-4(2), pp.685-692
- Rahman, M. M. and Gui, F., 1993, 'Design Fabrication and Testing Of Microchannel Heat Sink for Aircraft Avionics Cooling,' in: Proceedings of The 28th Intersociety Energy Conversion Eng. Conf. 1, pp. 1-6
- Qu Weilin, Mala, Gh. M., and Dongqing, Li., 2000, 'Pressure-Driven Water Flows in Trapezoidal Silicon Microchannels,' Int. J. Heat Mass Transf. Vol. 43 No. 3, pp. 353-364 https://doi.org/10.1016/S0017-9310(99)00148-9
- Qu Weilin, Mala, Gh. M. and Dongqing, Li, 2000, 'Heat Transfer for Water Flow in Trapezoidal Silicon Microchannels,' Int. J. Heat Mass Transf. Vol. 43 No.21, pp. 3925-3936 https://doi.org/10.1016/S0017-9310(00)00045-4
- Wu, H. Y. and Cheng, P., 2003, 'Friction Factors in Smooth Trapezoidal Silicon Micro Channels with Different Aspect Ratios,' Int. J. Heat Mass Transf.,Vol. 46 No.14, pp. 2519-2525 https://doi.org/10.1016/S0017-9310(03)00106-6
- Wu, H. Y. and Cheng, P., 2003, 'an Experimental Study of Convective Heat Transfer in Silicon Micro Channels with Different Surface Conditions,' Int. J. Heat Mass Transf.,Vol. 46 No.14, pp. 2547-2556 https://doi.org/10.1016/S0017-9310(03)00035-8
- Liu, D. and Gerimella, S. V., 2005, 'Analysis and Optimization of The Thermal Performance of Microchannel Heat Sinks,' International Journal for Numerical Methods In Heat and Fluid Flow., Vol.15 No.1, pp. 7-26 https://doi.org/10.1108/09615530510571921
- Gerimella, S. V. and Sobhan, C. B., 2003, 'Transport in Micro Channels-A Critical Review,' Annu. Rev. Heat Tansf., Vol 13, pp. 1-50 https://doi.org/10.1615/AnnualRevHeatTransfer.v13.30
- Knight, R. W., Hall, D. J., Goodling, J. S. and Jaeger, R. C., 1992, 'Heat Sink Optimization with Application to Micro Channels,' IEEE Trans. Compon., Hybrids, Manufact. Technol., Vol.15 No.5, pp. 832-842 https://doi.org/10.1109/33.180049
- Wei, X. J. and Joshi, Y., 2003, 'Optimization Study of Stacked Micro-Channel Heat Sinks for Micro-Electronic Cooling,' IEEE Trans. Compon. Packag. Technol., Vol.26 No.1, pp. 55-61 https://doi.org/10.1109/TCAPT.2003.811473
- Fisher, T. S. and Torrance, K. E., 2001, 'Optimal Shapes of Fully Embedded Channels for Conjugate Cooling,' IEEE Trans. Adv. Packag., Vol.24 No.4, pp 555-562 https://doi.org/10.1109/6040.982844
- Weisberg, A., Bau, H. H. and Zemel, J. N., 1992, 'Analysis of Micro Channels for Integrated Cooling,' Int. J. Heat Mass Transf., Vol. 35 No.10, pp. 2465-2474 https://doi.org/10.1016/0017-9310(92)90089-B
- Qu, W. and Mudawar, I., 2002, 'Analysis of Three Dimensional Heat Transfer in Micro-Channel Heat Sinks,' Int. J. Heat Mass Transf., Vol.45 No 19, pp. 3973-3985 https://doi.org/10.1016/S0017-9310(02)00101-1
- Toh, K. C., Chen, X. Y. and Chai, J. C., 2006, 'Numerical Computation of Fluid Flow and Heat Transfer in Microchannels,' Int. J. Heat Mass Transf., 45 (2002) 5133-5141 https://doi.org/10.1016/S0017-9310(02)00223-5
- Li, J. and Peterson, G. P., 'Geometric Optimization of a Micro Heat Sink With Liquid Flow,' IEEE Trans. Compon. Packag. Technol., Vol.29 No.1, pp145-154 https://doi.org/10.1109/TCAPT.2006
- Vanderplaats, G. N., 1984, 'Numerical Optimization Techniques for Engineering Design with Applications,' New York, Mcgraw-Hill
- Queipo, N. V., Haftka, R. T., Shyy, W., Goel, T., Vaidyanathan, R. and Tucker, P. K., 2005, 'Surrogate-Based Analysis and Optimization,' Progress in Aerospace Sciences.,Vol. 41 pp1-28 https://doi.org/10.1016/j.paerosci.2005.02.001
- Madou, M. J., MEMS Fabrication, in The MEMS Handbook, M. Gad-El-Hak, Ed. Boca Raton, FL: CRC, 16-1, 2002
- Laermer, F., Urban, A. and Challenges., 2003, 'Developments and Applications of Silicon Deep Reactive Ion Etching,' Microelectron, Eng. 67-68 pp 349-355 https://doi.org/10.1016/S0167-9317(03)00089-3
- CFX-5.7 Solver Theory, ANSYS 2004
- Patankar, S. V., 1980, 'Numerical Heat Transfer and Fluid Flow,' Mcgraw-Hill, New York, pp. 124-134
- Shah, R. K. and London, A. L., 1978, 'Laminar Flow Forced Convection in Ducts: A Source Book for Compact Heat Exchanger Analytical Data,' Supl. I, Academic Press, New York
- Sadk Kakac, Ramesh K. and Shah, Win Aung., 1987, 'Handbook of Single-Phase Convective Heat Transfer,' a Wiley-Interscience Publication, New York
- Lophaven, S. N., Nielsen, H. B. and Sondergaard, J., 2002, 'a MATLAB Kriging Toolbox,' Technical Report IMM-TR2002-12
- Husain, A. and Kim, K. Y., 'Thermal Optimization of a Microchannel Heat Sink With Trapezoidal Cross-Section,' Submitted to International Journal of Heat and Mass Transfer https://doi.org/10.1115/1.3103931
- Kawano K., Sekimura, M., Minakami, K., Iwasaki H. and Ishizuka, M., 2001, 'Development of Micro Channel Heat Exchanging,' JSME Int. Journal Series B 44(4)., pp. 592-598 https://doi.org/10.1299/jsmeb.44.592