DOI QR코드

DOI QR Code

DC and impulse electrical breakdown characteristics of LPP in liquid nitrogen for a HTS DC cable

고온초전도 DC케이블용 LPP의 액체질소 중 DC 및 임펄스 절연파괴 특성

  • 곽동순 (경상대 대학원 전기공학과) ;
  • 천현권 (경상대 대학원 전기공학과) ;
  • 최재형 (경상대 대학원 전기공학과) ;
  • 민치현 (경상대 대학원 전기공학과) ;
  • 김해종 (한국전기연구원 초전도기기연구그룹) ;
  • 조전욱 (한국전기연구원 초전도기기연구그룹) ;
  • 김상현 (경상대 대학원 전기공학과)
  • Published : 2007.09.30

Abstract

A high temperature superconducting (HTS) DC cable is ideal for transmitting large blocks of electrical power over a long distance. However, it must be designed to operate reliably within the constraints of the electrical systems. Therefore, a study of the electrical insulation is important to develop a HTS DC cable because it is operated in a cryogenic high voltage environment. This paper discusses the dielectric constructions of the cable and summarizes the experimental results on the DC and impulse dielectric characteristics of the insulation material. in sheet form and mini-model cable configuration. This shows how to design such insulation to be operated reliably. These studies are essential for the insulation design of a HTS DC cable operated in cryogenic environment.

Keywords

References

  1. Jeonwook Cho, Joon-Han Bae, Hae-Jong Kim, Ki-Deok Sim, Seokho Kim, Hyun-Man Jang, Chang-Young Lee, Dong-Wook Kim, 'Development of a single-phase 30 m HTS power cable,' Cryogenics, Vol. 46, No.5, pp. 333-337, May 2006 https://doi.org/10.1016/j.cryogenics.2005.11.025
  2. P. Chowdhuri, 'Electrical characteristics of a dc superconducting cable,' Cryogenics, Vol. 22, No, 4, p p. 171-180, Apr. 1982 https://doi.org/10.1016/0011-2275(82)90142-4
  3. Pritindra Chowdhuri, Chandralekha Pallem, Jonathan A Demko, and Michael J Gouge, 'Feasibility of Electric Power Transmission by DC Superconducting Cables,' IEEE Trans. on Appl. Supercond. Vol. 15, No.4, pp. 3917-3926, Dec. 2005 https://doi.org/10.1109/TASC.2005.859046
  4. P. Chowdhuri, C. Pallem, J. A. Demko, and M. J. Gouge, 'Analysis on the Transient Voltage Performance of a DC Superconducting Cables,' IEEE Trans. on Appl, Supercond. Vol. 16, No. 1, pp. 31-37, Mar. 2006 https://doi.org/10.1109/TASC.2005.863519
  5. IEC 60243-1 Ed. 2.0 b. 'Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies,' 1998
  6. 곽동순, 천현권, 김해종, 조전욱, 정순용, 김상현, '고온초전도 케이블의 절연설계를 위한 적층효과,' 한국전기전자재료학회 논문지, 18권, 10호, pp. 950-955, 2005 https://doi.org/10.4313/JKEM.2005.18.10.950
  7. H. Okubo, M. Hazeyama, N. Hayakawa , S. Honjo , and T. Masuda, 'V-t characteristics of partial discharge inception in liquid nitrogen/ $PPLP^\circledR$ composite insulation system for HTS cable,' IEEE Trans. on Dielectrics and Electrical Insulation, Vol. 9, No.6, p. 945, 2002 https://doi.org/10.1109/TDEI.2002.1115488
  8. M. Hazeyama, T. Kobayashi, N. Hayakawa, S. Honjo , T. Masuda, and H. Okubo, 'Partial discharge inception characteristics under butt gap condition in liquid nitrogen/$PPLP^\circledR$ composite insulation system for high temperature superconducting Cable,' IEEE Trans. on Dielectrics and Electrical Insulation, Vol. 9, No. 6, p . 939, 2002 https://doi.org/10.1109/TDEI.2002.1115487