Nuclear Engineering and Technology

  • 제39권4호
  • /
  • Pages.337-348
  • /
  • 2007
  • /
  • 1738-5733(pISSN)
  • /
  • 2234-358X(eISSN)
한국원자력학회 (Korean Nuclear Society)
권호 표지
DOI QR코드

DOI QR Code

PREDICTION OF RESIDUAL STRESS FOR DISSIMILAR METALS WELDING AT NUCLEAR POWER PLANTS USING FUZZY NEURAL NETWORK MODELS

  • Na, Man-Gyun (Department of Nuclear Engineering, Chosun University) ;
  • Kim, Jin-Weon (Department of Nuclear Engineering, Chosun University) ;
  • Lim, Dong-Hyuk (Department of Nuclear Engineering, Chosun University)
  • 발행 : 2007.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A fuzzy neural network model is presented to predict residual stress for dissimilar metal welding under various welding conditions. The fuzzy neural network model, which consists of a fuzzy inference system and a neuronal training system, is optimized by a hybrid learning method that combines a genetic algorithm to optimize the membership function parameters and a least squares method to solve the consequent parameters. The data of finite element analysis are divided into four data groups, which are split according to two end-section constraints and two prediction paths. Four fuzzy neural network models were therefore applied to the numerical data obtained from the finite element analysis for the two end-section constraints and the two prediction paths. The fuzzy neural network models were trained with the aid of a data set prepared for training (training data), optimized by means of an optimization data set and verified by means of a test data set that was different (independent) from the training data and the optimization data. The accuracy of fuzzy neural network models is known to be sufficiently accurate for use in an integrity evaluation by predicting the residual stress of dissimilar metal welding zones.

키워드

참고문헌

  1. M. Mochizuki, 'Control of Welding Residual Stress for Ensuring Integrity Against Fatigue and Stress-Corrosion Cracking,' Nucl. Eng. Des., 237, p. 107 (2007) https://doi.org/10.1016/j.nucengdes.2006.05.006
  2. P. Michaleris, J. Dantzig, and D. Tortorelli, 'Minimization of Welding Residual Stress and Distortion in Large Structures,' Welding J., 78, p. 361s (1999)
  3. E. B. Bartlett and R. E. Uhrig, 'Nuclear Power Plant Diagnostics Using an Artificial Neural Network,' Nucl. Technol., 97, p. 272 (1992)
  4. H. G. Kim, S. H. Chang, and B. H. Lee, 'Optimal Fuel Loading Pattern Design Using an Artificial Neural Network and A Fuzzy Rule-Based System,' Nucl. Sci. Eng., 115, p. 152 (1993)
  5. K. Kavaklioglu and B. R. Upadhyaya, 'Monitoring Feedwater Flow Rate and Component Thermal Performance of Pressurized Water Reactors by Means of Artificial Neural Networks,' Nuclear Technology, 107, p. 112 (1994)
  6. J. W. Hines, D. J. Wrest, and R. E. Uhrig, 'Signal Validation Using an Adaptive Neural Fuzzy Inference System,' Nucl. Technology, 119, p. 181 (1997)
  7. P. Fantoni, S. Figedy, and A. Racz, 'A Neuro-Fuzzy Model Applied Full Range Signal Validation of PWR Nuclear Power Plant Data,' FLINS'98, Antwerpen, Belgium, Sept. 14-16, 1998
  8. M. G. Na and B. R. Upadhyaya, 'A Neuro-fuzzy Controller for Axial Power Distribution in Nuclear Reactors,' IEEE Trans. Nucl. Sci., 45, p. 59 (1998) https://doi.org/10.1109/23.659555
  9. M. G. Na, Dong Won Jung, Sun Ho Shin, Kibog Lee, and Yoon Joon Lee, 'Estimation of the Nuclear Power Peaking Factor Using In-core Sensor Signals,' J. Korean Nucl. Soc., 36, p. 420 (2004)
  10. Hibbitt, Karlson & Sorensen, Inc., ABAQUS/Standard User's Manual, 2001
  11. V. Robin et al., 'Modelling of Bimetallic Welds,' Proc. Mathematical Modeling of Weld Phenomena 6, 2002
  12. D. E. Katsareas and A. G. Youtsos, 'Residual stress prediction in dissimilar metal weld pipe joints using finite element method,' Proc. ICRS-7, 2004
  13. B. Brickstad and B. L. Josefson, 'A Parametric Study of Residual Stresses in Multi-Pass Butt-Welded Stainless Steel Pipes,' Int. J. of Press. Ves. & Piping, 75, p. 11 (1998) https://doi.org/10.1016/S0308-0161(97)00117-8
  14. S. L. Chiu, 'Fuzzy Model Identification Based on Cluster Estimation,' J. Intell. Fuzzy Systems, 2, p. 267 (1994) https://doi.org/10.1109/91.324806
  15. T. Takagi and M. Sugeno, 'Fuzzy Identification of Systems and Its Applications to Modeling and Control,' IEEE Trans. Systems, Man, Cybern., SMC-1, p. 116 (1985)
  16. M. G. Na, Neuro-Fuzzy Control Applications in Pressurized Water Reactors: in Da Ruan (ed) Fuzzy Systems and Soft Computing in Nuclear Engineering, Springer-Verlag, Berlin Heidelberg New York, pp. 172-207 (1999)
  17. D. E. Goldberg, Genetic Algorithms in Search, Optimization, and Machine Learning, Addison Wesley, Reading, MA (1989)
  18. M. Mitchell, An Introduction to Genetic Algorithms, MIT Press, Cambridge, MA (1996)

피인용 문헌

  1. Detection and Diagnostics of Loss of Coolant Accidents Using Support Vector Machines vol.55, pp.1, 2008, https://doi.org/10.1109/TNS.2007.911136
  2. Soft Computing Techniques in Stainless Steel Welding vol.24, pp.2, 2009, https://doi.org/10.1080/10426910802612338
  3. Modelling and long-term simulation of a heat recovery steam generator vol.19, pp.2, 2013, https://doi.org/10.1080/13873954.2012.698623
  4. Residual stress field analysis of Al/steel butt joint using laser welding–brazing vol.33, pp.17, 2017, https://doi.org/10.1080/02670836.2017.1343760