EXPERIMENTAL INVESTIGATION AND COMPARISON OF SPRAY AND COMBUSTION CHARACTERISTICS OF GTL AND DIESEL FUELS

  • Kim, K.S. (Department of Mechanical Design Engineering, Chonnam National University) ;
  • Beschieru, V. (Department of Mechanical Design Engineering, Chonnam National University) ;
  • Jeong, D.S. (Korea Institute of Machinery and Materials) ;
  • Lee, Y. (Korea Institute of Machinery and Materials)
  • Published : 2007.06.30

Abstract

GTL (Gas To Liquid) has the potential to be used in diesel engines as a clean alternative fuel due to advantages in emission reduction, particularly soot reduction. Since the physical properties of GTL fuel differ from those of diesel fuel to some extent, studying how this difference in characteristics of GTL and diesel fuels affects spray and combustion in diesel engines is important. In this study, visual investigation of sprays and flames from GTL and diesel fuels in a vessel simulating diesel combustion was implemented. The effects of various parameters and conditions, such as injection pressure, chamber temperature and pilot injection on liquid-phase fuel length and auto-ignition delay were investigated. It was determined that GTL has a somewhat shorter liquid-phase fuel length, which explains why there is less contact between the fuel liquid-phase and flame for GTL fuel compared to diesel fuel.

Keywords

References

  1. Alleman, T. L. and Eudy, L. (2004). Fuel property, emission test, and operability results from a fleet of class 6 vehicles operating on gas-to-liquid fuel and catalyzed diesel particle filters. SAE Paper No. 2004-01-2959
  2. Fukumoto, M., Oguma, M. and Goto, S. (2003). Experimental investigation of lubricity improvement of gasto- liquid (GTL) fuels with additives for low sulphur diesel fuel. SAE Paper No. 2003-01-1948
  3. Higgins, B., Siebers, D. and Aradi, A. (2000). Dieselspray ignition and premixed-burn behavior. SAE Paper No. 2000-01-0940
  4. Hiroyasu H. and Arai, M. (1990). Structures of fuel sprays in diesel engines. SAE Paper No. 900475
  5. Oguma, M., Goto, S. and Chen, Z. (2004). Fuel characteristics evaluation of GTL for DI diesel engine. SAE Paper No. 2004-01-0088
  6. Oguma, M., Goto, S., Oyama, K., Sugiyama, K. and Mori, M. (2002). The possibility of gas to liquid (GTL) as a fuel of direct injection diesel engine. SP–1716, SAE Int. Spring Fuels & Lubricants, May 6-9, 2002
  7. Park, S. W. and Lee, C. S. (2003). Macroscopic structure and atomization characteristics of high-speed diesel spray. Int. J. Automotive Technology 4, 4, 157-164
  8. Siebers, D. L. (1998). Liquid-phase fuel penetration in diesel sprays. SAE Paper No. 980809