International Journal of Automotive Technology

  • 제8권2호
  • /
  • Pages.155-163
  • /
  • 2007
  • /
  • 1229-9138(pISSN)
  • /
  • 1976-3832(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

INVESTIGATION OF SHORT INJECTIONS USING STANDARD AND MODIFIED COMMON RAIL INJECTORS

  • Ficarella, A. (University of Lecce, Department of Engineering for Innovation) ;
  • Giuffrida, A. (University of Catania, Department of Industrial and Mechanical Engineering) ;
  • Lanzafame, R. (University of Catania, Department of Industrial and Mechanical Engineering)
  • 발행 : 2007.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The control of the fuel to be introduced into the combustion chamber under idling and low-load conditions is known to be a problem in Diesel engines, owing to the relatively small fraction of the full-load fuel needed under light loads. Thus, particular attention should be paid to the behavior of the injector with reference to short injection events. This work presents the results of an experimental campaign carried out with two different types of common rail injectors, a standard injector and a modified one. The latter, coming from a simple modification realized in a standard injector, exhibits linear behavior between injected fuel and solenoid energizing time in the field of short injections. A direct comparison of the two injection behaviors suggests a possible way to better control short or pilot injections.

키워드

참고문헌

  1. Arvizzigno, A. (2002). Private Communication, Bosch - CSIT, Bari, Italy
  2. Badami, M., Mallamo, F., Millo, F. and Rossi, E. E. (2003). Experimental investigation on the effect of multiple injection strategies on emissions, noise and brake specific fuel consumption of an automotive direct injection common rail diesel engine. Int. J. Engine Research 4, 4, 299-314 https://doi.org/10.1243/146808703322743903
  3. Bae, C. and Kang, J. (2000). Diesel spray characteristics of common rail VCO nozzle injectors. THIESEL 2000 Conf. Thermo and Fluid-Dynamic Processes in Diesel Engines, Valencia, Spain
  4. Bermudez, V., Payri, R., Salvador, F. J. and Plazas, A. H. (2005). Study of the influence of nozzle seat type on injection rate and spray behavior. Proc. Institution of Mechanical Engineers, 219, Part D, J. Automobile Engineering, 677-689
  5. Boehner, W. and Hummel, K. (1997). Common rail injection system for commercial diesel vehicles. SAE Paper No. 970345
  6. Bosch, W. (1996). The fuel rate indicator: a new measuring instrument for display of the characteristics of individual injection. SAE Paper No. 660749
  7. Carlucci, P., Ficarella, A. and Laforgia, D. (2003a). Effects of pilot injection parameters on combustion for common-rail diesel engines. SAE Paper No. 2003-01-0700
  8. Carlucci, P., Ficarella, A., Giuffrida, A. and Lanzafame, R. (2003b). Investigation on realizing fuel rate shaping using a common rail injector. ASME ICES 2003 Spring Technical Conf., Salzburg, Austria, May 11-14
  9. Carlucci, A., Ficarella, A., Chiara, F., Giuffrida, A. and Lanzafame, R. (2004). Preliminary studies on the effects of injection rate modulation on the combustion noise of a common rail diesel engine. SAE Paper No. 2004-01-1848
  10. Carlucci, P., Ficarella, A. and Laforgia, D. (2005). Effects on combustion and emissions of early and pilot fuel injections in diesel engines. Int. J. Engine Research 6, 1, 43-60 https://doi.org/10.1243/146808705X7301
  11. Ficarella, A., Laforgia, D. and Landriscina, V. (1999). Evaluation of instability phenomena in a common rail injection system for high speed diesel engines. SAE Paper No. 1999-01-0192
  12. Ficarella, A., Giuffrida, A. and Lanzafame, R. (2005). Common rail injector modified to achieve a modulation of the injection rate. Int. J. Automotive Technology 6, 4, 305-314
  13. Ganser, M. A. (2000). Common rail injectors for 2000 bar and beyond. SAE Paper No. 2000-01-0706
  14. Han, J. S., Wang, T. C., Xie, X. B., Lai, M. C., Henein, N. A., Harrington D. L., Pinson, J. and Miles, P. (2000). Dynamics of multiple injection fuel sprays in a small bore HSDI diesel engine. SAE Paper No. 2000-01-1256
  15. Henein, N. A., Lai, M. C., Singh, I. P., Zhong, L. and Han, J. (2002). Characteristics of a common rail diesel injection system under pilot and post injection modes. SAE Paper No. 2002-01-0218
  16. Iiyama A., Masumoto Y., Kawamoto K. and Ohishi T. (1992). Spray formation improvement of a VCO nozzle for DI diesel smoke reduction. ImechE Seminar on Diesel Fuel Injection Systems, Birmingham, UK
  17. Kampmann, S., Dittus, B., Mattes, P. and Kirner, M. (1996). The influence of hydro grinding at VCO nozzles on the mixture preparation in a DI diesel engine. SAE Paper No. 960867
  18. Kitayama, N., Montajir, R. M., Oonishi, H., Ishitani, H. and Tsunemoto, H. (2003). Cylinder to cylinder deviations in combustion and emission at idling in DI diesel engines with pilot injection. JSME Int. J., Series B, 46, 1, 117-123 https://doi.org/10.1299/jsmeb.46.117
  19. Lyu, M. S. and Shin, B. S. (2002). Study of nozzle characteristics on the performance of a small-bore high-speed direct injection diesel engine. Int. J. Engine Research 3, 2, 69-79 https://doi.org/10.1243/14680870260127864
  20. Mahr, B. (2002). Future and potential of diesel injection systems. THIESEL 2002 Conf. Thermo and Fluid- Dynamic Processes in Diesel Engines, Valencia, Spain
  21. Mulemane, A., Han, J. S., Lu, P. H., Yoon, S. J. and Lai, M. C. (2004). Modeling dynamic behavior of diesel fuel injection systems. SAE Paper No. 2004-01-0536
  22. Nam, K., Yoon, M., Park, S. and Sunwoo, M. (2004). Development of a sensorless estimation algorithm of the injection timing and rate for common rail injector. JSME Int. J., Series C, 47, 3, 882-888 https://doi.org/10.1299/jsmec.47.882
  23. Payri, R., Climent, H., Salvador, F. J. and Favennec, A. G. (2004). Diesel injection system modeling - Methodology and application for a first generation common rail system. Proc. Institution of Mechanical Engineers, 218, Part D, J. Automobile Engineering, 81-91
  24. Soteriou, C., Andrews, R. J. and Smith, M. (1995). Direct injection diesel sprays and the effect of cavitation and hydraulic flip on atomisation. SAE Paper No. 950080
  25. Stumpp, G. and Ricco, M. (1996). Common rail - An attractive fuel injection system for passenger car DI diesel engines. SAE Paper No. 960870
  26. Tanaka, T., Ando, A. and Ishizaka, K. (2002). Study on pilot injection of DI diesel engine using common rail injection system. JSAE Review, 23, 297-302 https://doi.org/10.1016/S0389-4304(02)00195-9
  27. Wang, T. C., Han, J. S., Xie, X. B., Lai, M. C., Henein, N. A., Schwarz, E. and Bryzik, W. (2003). Parametric characterization of high-pressure diesel fuel injection systems. ASME J. Engineering for Gas Turbines and Power 125, 2, 412-426 https://doi.org/10.1115/1.1498268