초록
본 연구에서는 DMT를 이용한 비배수 전단강도를 파악하기 위하여 부산신항 점토층에 DMT 시험, 베인전단시험, $CK_0U$ 삼축압축시험을 실시하였다. 시험결과 정규화한 비배수 전단강도비는 삼축시험의 경우 $S_{u(CKU)}/{\sigma}'_v=0.30{\sim}0.35$, 베인전단시험의 경우 ${\mu}S_{u(VST)}/{\sigma}'_v=0.20{\sim}0.22$로 나타났다. 본 연구에서는 현장 베인전단시험 및 삼축압축시험 결과와의 비교를 통해, DMT를 이용하여 비배수 전단강도를 추정하는 두 가지 방법을 제안하였다. 첫 번째는 $S_u/{\sigma}'_v$와 횡방향 응력지수의 관계를 이용하는 방법이고, 두 번째는 $N_c-I_D$ 또는 $N_c-E_D$ 관계로부터 비배수 전단강도를 추정하는 방법이다. 베인전단시험 및 삼축시험 결과와 두 가지 추정방법을 비교한 결과, $N_c-I_D$ 또는 $N_c-E_D$ 관계를 이용한 방법이 $K_D$ 이용하는 방법보다 비배수 전단강도를 정확하게 추정하는 것으로 나타났다. 이것은 $I_D$와 $E_D$가 토질상태를 반영하는 $p_1-p_0$항을 포함하고 있어, $N_c$를 이용하는 방법이 토질을 고려한 비배수 전단강도 추정을 할 수 있기 때문으로 판단된다.
A series of dilatometer test, field vane test, and $CK_0U$ triaxial test were performed for clayey soils of Busan new port site to develop the relationships between undrained shear strength and the DMT results. Normalized undrained shear strength is turned out to be $S_{u(CKU)}/{\sigma}'_v=0.30{\sim}0.35\;for\;CK_0U$ triaxial test and ${\mu}S_{u(VST)}/{\sigma}'_v=0.20{\sim}0.22$ for vane shear test. By comparing the undrained shear strength estimated from DMT indices with the results measured by in-situ vane test or $CK_0U$ triaxial test, two methods to predict the undrained shear strength from DMT results are suggested. One is based on the relationship between $S_u/{\sigma}'_v$ and horizontal stress index (KD) while another method comes from $N_c-I_D$ and $N_c-E_D$ correlation. It was observed that the method based on $N_c-I_D\;or\;N_c-E_D$ relation shows slightly better accuracy than the one based on $K_D$ although all of the methods suggested in this study provided comparable values of predicted undrained shear strength. Since the definitions of $I_D\;and\;E_D$ contain $p_1-p_0$, in which soil condition is reflected, it is believed that the prediction method using $N_c$ is capable of taking a material type into consideration.