Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering (한국산업경영시스템학회)
권호 표지

Case Study of Hybrid Tooling using High Speed Cutting and Ceramic SLA (StereoLithography Apparatuses) Technologies

괘속조형(Ceramic SLA)과 고속가공을 이용한 단납금형 개발에 대한 연구

  • Kwon, Hong-Kyu (Dept. of Industrial and Management Engineering, Chungju National University) ;
  • Hong, Jung-Eui (Dept. of Industrial and Management Engineering, Chungju National University)
  • 권홍규 (충주대학교 산업경영공학과) ;
  • 홍정의 (충주대학교 산업경영공학과)
  • Published : 2007.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

"Getting to market first" is extremely critical in this competitive business environment. The speed at which products are developed and released to market is tightly linked to profitability and market share. Many companies that have been very skeptical of Rapid Tooling (RT) technologies developed so far are working on Hybrid Tooling (HT) that can really meet the market standards. This paper describes the experimentation how HT process has been being successfully established and effectively applied with typical case study. Through the experimentation, Ceramic-filled HT was found to be aptly suited for the low grade mold, both in terms of the lead time, dimensional accuracy, and tooling cost.

Keywords

References

  1. Eric Radstock; 'Rapid tooling,' Rapid Prototyping Journal, 5(4) : 164-168, 1999 https://doi.org/10.1108/13552549910295488
  2. James G. Hemrick et al.; 'Release behavior for powder injection molding in stereolithography molds,' Rapid Prototyping Journal, 7(2) : 115-121, 2001 https://doi.org/10.1108/13552540110386772
  3. Neil Hopkinson et al.; 'A comparison between stereolithography and aluminum injection molding tooling,' Rapid Prototyping Journal, 6(4) : 253-258, 2000 https://doi.org/10.1108/13552540010373353
  4. Lena Apelskog Killander; 'Rapid Mold: epoxy-infiltrated, laser sintered inserts,' Rapid Prototyping Journal, 2(1) : 34-40, 1996 https://doi.org/10.1108/13552549610109063
  5. Materialise; 'Magics: STL manipulation software,' Munchen, Deutschland(http://www.materialise.com). 2003