무전지 SAW 기반 마이크로 통합센서 및 무선 측정기술 개발

Development of Batteryless SAW-based Integrated Microsensor and Wireless Measurement Technique

  • 오해관 (아주대학교 대학원 전자공학과) ;
  • 김태현 (아주대학교 전자공학과) ;
  • 왕웬 (아주대학교 전자공학과) ;
  • 양상식 (아주대학교 전자공학과) ;
  • 이기근 (아주대학교 전자공학과)
  • 발행 : 2007.08.01

초록

We developed a 440MHz surface acoustic wave (SAW) microsensor integrated with pressure-temperature sensors and ID tag. Two piezoelectric substrates were bonded, in which ${\sim}150\;{\mu}m$ cavity was structured. Four sides were completely sealed by JSR photoresist (PR). Pressure sensor was placed on the top substrate, whereas ill tag and temperature sensor were placed on the bottom substrate. Using network analyzer, the developed microsensor was wirelessly tested. Sharp reflection peaks with high S/N ratio, small signal attenuation, and small spurious peaks were observed. All the reflection peaks were well matched with the coupling of mode (COM) simulation results. With a 10mW RF power from the network analyzer, a ${\sim}1$ meter readout distance was observed. Eight sharp ON reflection peaks were observed for ID tag. Temperature sensor was characterized from $20^{\circ}C$ to $200^{\circ}C$. A large phase shift per unit temperature change was observed. The evaluated sensitivity was ${\sim}10^{\circ}/^{\circ}C$.

키워드

참고문헌

  1. Reindl L, 'Wireless passive SAW identification marks and sensors', Symp. on Acoustic Wave Devices for Future Mobile Communication Systems (Chiba), p. 21, 2004
  2. Lange K, Blasess G, Voigt A, 'Integration of a surface acoustic wave biosensor in a microfluidic polymer chip', Biosensors Bioelectron., vol. 22, p. 227, 2006 https://doi.org/10.1016/j.bios.2005.12.026
  3. Dong Y, Cheng W, Wang S, 'A multi-resolution passive SAW chemical sensor', Sensors Actuators B, vol. 76, pp. 130, 2001
  4. Reindl L, Ruppel C, Riek K, Pankratz T, Weigel R, 'A wireless AQP pressure sensor using chirped SAW delay lines structures', IEEE Ultrasonics Symp., p. 355, 1998
  5. Schimetta G, Dollinger F, Scholl G, Weigel R, 'Optimized design and fabrication of a wireless pressure and temperature sensor unit based on SAW transponder technology', IEEE Ultrasonics Symp., p. 355, 2001
  6. Reindl L, Pohl A, Schll G, Weigel R, 'SAW based radio sensor systems', IEEE Sensors J., vol. 1, p. 69, 2001
  7. Hartmann C, 'A global SAW ill tag with large data capacity', IEEE Ultrasonics Symp., p. 65, 2002
  8. Hartmann C, Brown P, Bellamy J, 'Design of global SAW RFID tag devices', Symp, on Acoustic Wave Devices for Future Mobile Communication Systems (Chiba), p 15, 2004
  9. Campbell C, 'Surface Acoustic Wave Devices for Mobile and Wireless Communications', London: Academic, 1988
  10. Gardner J, Varadan V, Awadelkarim O,'Microsensors MEMS and Smart Devices', New York; Wiley, 2001
  11. Reindl L, Shrena I, 'Wireless measurement of temperature using surface acoustic waves sensors', IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 51, p. 1457, 2004 https://doi.org/10.1109/TUFFC.2004.1367486
  12. Reindl L, Scholl G, Ostertag T, Scherr H, Wolff U, Schmidt F, 'Theory and application of passive SAW adio transponders as sensors', IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 45, p. 1281, 1998
  13. Talbi A, Elmazria O, Sarry F, Alnot P, 'Thickness and harmonic frequency effects on the range and sensitivity of SAW pressure sensor', European Conf. on Solid-State Transducers (Prague), p. 638, 2002
  14. Scherr H, Scholl G, Seifert F, Weigel R, 'Quartz pressure sensor based on SAW reflective delay line', IEEE Ultrasonics Symp., p. 347, 1996