Thermal and Humidity Sensing Properties of Heat Resistant Polyimide Thin Film Manufactured by Dry Process

건식법에 의해 제조된 내열성 폴리이미드박막의 열적특성 및 습도감지특성

  • Published : 2007.06.01

Abstract

The aim of this paper is to establish the optimum fabrication condition of specimens, using the Vapor Deposition Polymerization Method(VDPM), which is one of modesto prepare functional organic thin films using a dry process, and to develop a thin film type humidity sensor which has good humidity sensitive characteristics. The inner part of the film became denser and roughness of the film surface eased as curing temperature increased so that thickness of the film could be made uniform. This also shows the appropriate curing temperature was $250^{\circ}C$. The basic structure of the humidity sensor is a parallel capacitor which consists of three layers of Aluminum/Polyimide/Aluminum. The result of SEM and AFM measurement shows that the thickness of PI thin films decreased and the refraction increased as curing temperature increased, which indicates that a capacitance-type humidity sensor utilizing polyimide thin film is fabricated on a glass substrate. The characteristics of fabricated samples were measured under various conditions, and the samples had linear characteristics in the range of 20-80 %RH, independent of temperature change, and low hysteresis characteristic.

Keywords

References

  1. C. E. Srong, Polyimides: Fundamentals and Applications, ed. by Malay K. Chosh, Marcel Dekker, New york, p. 1-5(1996)
  2. W.J. Park, S.G. Yoon, W.S. Jung and D.H. Yoon, 'Effect of dielectric barrier discharge on surface modification characteristics of polyimide film', Surface and Coatings Technology, Vol. 201, Issues 9-11, pp. 5017-5020(2007) https://doi.org/10.1016/j.surfcoat.2006.07.203
  3. D. Briand, S. Colin, A. Gangadharaiah, E. Vela, P. Dubois, L. Thiery and N.F. de Rooij, 'Micro-hotplates on polyimide for sensors and actuators', Sensors and Actuators A: Physical, Vol. 132, Issue 1, pp. 317-324(2006) https://doi.org/10.1016/j.sna.2006.06.003
  4. S.W. Pyo, D.H. Lee, J.R. Koo, J.H. Kim, J.H. Shim, J.S. Kim and Y.K. Kim, 'Electrical Effect in Organic Thin-Film Transistors Using Polymerized Gate Insulators by Vapor Deposition Polymerization (VDP)', Synthetic Metals, Vol. 154, Issues 1-3, pp. 141-144(2005) https://doi.org/10.1016/j.synthmet.2005.07.036
  5. Kazuo Iida, Shuhei Nakamura and Goro Sawa. 'Dielectric Breakdown and Molecular Orientation of Poly(4,4 '- oxydiphenylene pyromellitimide)', Jpn. J. Appl. Phys., 33-1(11), pp.6235-6239(1994) https://doi.org/10.1143/JJAP.33.6235
  6. M. Jandke, K. Kreger and P. Strohriegl, 'Poly (phenylquinoxalines) by vapor deposition polymerization', Synthetic Metals, Vol. 111-112, pp. 221-223(2000) https://doi.org/10.1016/S0379-6779(99)00351-3
  7. Boong- Joo Lee, Hyeong-Gweon Kim and Duck-Chool Lee, 'Electrical properties of polyimide thin films formed by the vapor deposition polymerization method', Surface and Coatings Technology, Vol. 150, Issues 2-3, pp. 182-187(2002) https://doi.org/10.1016/S0257-8972(01)01535-3
  8. J. H. Kreuz, A. L. Endrew, F. P. Gay, C. E. Sroog : J. of Polym. Sci., 42067(1967)
  9. Gorden P. Brown, Doris T. Haon, and Max Metaly, 'The use of Thermal Analysis Methodes for the Estimation of Thermal life Rating of Magnet Wire Enamels'. IEEE Trans, Elec Insul.. EI-8(2), pp.36-41(1973) https://doi.org/10.1109/TEI.1973.299260
  10. M. H. Brink, Polymer., Vol. 35, p.5018(1994) https://doi.org/10.1016/0032-3861(94)90658-0
  11. T. Matsuura, M. Ishizawa, Y. Hasuda, S. Nishi, Macromolecules, 25, pp.3540-3545(1992) https://doi.org/10.1021/ma00039a036