A Study on the High Speed Communication Interface with Virtual Modem

가상 모뎀과의 고속 인터페이스구조에 관한 연구

  • Published : 2007.01.25

Abstract

In order to design and test an SoC modem for high speed communication, the platform with the architecture of such high speed communication is needed. That platform is needed for testing large data in speed of 500Mbps. This paper shows that transmission data can be uploaded and downloaded by 250Mbps between a virtual modem target board and a PC through the AHB-PCI IP and the speed of based on DPRAM and PCI.

차세대통신의 고속 모뎀을 위한 SoC(System on a chip)를 설계하고 테스트하기 위해서는 고속 전송 구조를 가지는 플랫폼의 사용이 필수적이다. 즉 500Mbps 대용량 데이터를 고속으로 실시간 시험할 수 있는 전송 플랫폼이 필요하다. 본 논문은 가상모뎀 SoC 의 고속 전송 구조를 실시간으로 검증하기 위하여 고대역폭의 데이터 전송을 처리할 수 있는 SoC 타겟 보드와 PC를 PCI로 연결하고 AHB-PCI 브릿지 IP를 통하는 인터페이스 구조를 제시한다. 기존의 가상 모뎀 SoC 타겟보드에서 ARM 프로세서와 SDRAM 방식의 통신 구조보다도 개선된 DPRAM방식의 통신 구조를 사용하여 두 매체간의 업로드 및 다운로드 속도가 250Mbps의 고속통신이 가능한 것을 증명하였다.

Keywords

References

  1. Rajsuman, Rochit, System On a Chip Design and Test, Artech House, 2002
  2. PLD applications, 'AHB-PCI Bridge IP Core Reference Manual', pp27-32, Sep.2006
  3. 휴인스기술연구소 'ARM922T Core를이용한 SoC 설계및응용', 흥릉과학출판사 pp.393-449, May. 2005
  4. Altera corporation, 'Excalibur Hardware Reference Manual', pp.14-22, Nov. 2002
  5. ARM, 'ARM922T Technical Reference Manual', pp.2-2, 2001
  6. Altera corporation, 'Excalibur Device Overview', pp.5-7, Nov. 2002